Brisbane Taxi Frequencies
- Doogs38
- Registered User
- Posts: 113
- Joined: Fri Apr 16, 2010 6:29 pm
- Location: Walloon
- Contact:
Brisbane Taxi Frequencies
Hi. I've had a look at the ACMA website and found listings for Yellow Cabs and Black & White cabs; there are a lot of frequencies and I'm not confident that they're all used for voice traffic. Does anyone have a list of commonly used taxi frequencies for the Brisbane area (I live in the Ipswich region if that helps)? Thanks. Alex
-----------
Alex www.pbase.com/doogs38
Alex www.pbase.com/doogs38
- rochedalescan
- Founder
- Posts: 1632
- Joined: Fri Jun 01, 2007 5:08 pm
- Location: Brisbane
- Contact:
Re: Brisbane Taxi Frequencies
You'll probably find most of the frequencies are data frequencies for their MDT's, Also alot of the taxi frequencies are one sided so you would only hear Comms or the unit calling in, I'm not too sure what this is called but it has been discussed somewhere before if I can recall. Not too sure on frequencies bud. Someone else might have a better idea.
Shane Logan
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
- 878ROB
- Registered User
- Posts: 111
- Joined: Fri Jul 31, 2009 8:43 pm
- Location: Capalaba
Re: Brisbane Taxi Frequencies
Some Taxi Company 462.850..... give that a go mate
878 ROMEO OSCAR BRAVO Bleeding through a television near you!
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Brisbane Taxi Frequencies
You can ignore any emission designator that ends in 'D' such as 16K0F2D, as that will be Data of some description.Doogs38 wrote:Hi. I've had a look at the ACMA website and found listings for Yellow Cabs and Black & White cabs; there are a lot of frequencies and I'm not confident that they're all used for voice traffic. Does anyone have a list of commonly used taxi frequencies for the Brisbane area (I live in the Ipswich region if that helps)? Thanks. Alex
--
Comint
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Brisbane Taxi Frequencies
Yellow Cabs off Mt Coot-tha.878ROB wrote:Some Taxi Company 462.850..... give that a go mate
--
Comint
- Doogs38
- Registered User
- Posts: 113
- Joined: Fri Apr 16, 2010 6:29 pm
- Location: Walloon
- Contact:
Re: Brisbane Taxi Frequencies
Thanks all. I've used what is on the ACMA website, minus the designators ending in 'D' (thanks Comint). Had it running for an hour and heard exactly nothing! Back to my usuals I think. Alex
-----------
Alex www.pbase.com/doogs38
Alex www.pbase.com/doogs38
- AIRMAN
- Registered User
- Posts: 627
- Joined: Wed Aug 06, 2008 3:49 pm
Re: Brisbane Taxi Frequencies
Yellow Cab Dispatch is 462.1150
Loud and clear up here in Toowoomba.
Loud and clear up here in Toowoomba.
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Brisbane Taxi Frequencies
Transmitter is located on Mt Kynoch at Toowoomba. Probably not of much use to someone living near Ipswich.AIRMAN wrote:Yellow Cab Dispatch is 462.1150
Loud and clear up here in Toowoomba.
--
Comint
-
- Registered User
- Posts: 156
- Joined: Tue Dec 20, 2011 6:04 pm
Re: Brisbane Taxi Frequencies
Maybe bumping a dead thread, but I've been doing research on this for quite a while. 3 pages of my scribbling everywhere.
What I can figure is all repeaters simulcast the dispatcher's voice. RX audio from the taxi's TX is not repeated.
What I can figure is all repeaters simulcast the dispatcher's voice. RX audio from the taxi's TX is not repeated.
-
- Senior Member
- Posts: 376
- Joined: Tue Oct 05, 2010 11:27 am
Re: Brisbane Taxi Frequencies
Taxis use MDT, but often, that doesn't work. Voice is used when computers fail, data drop out, more complex information has to be sent, and most usually, when the driver wants to argue. The dispatcher transmits across a variety of frequencies, but by using CTCSS, is only heard on a single frequency in thearea it is being directed to. Because you are not using CTCSS, you hear it all. In order to hear the car, you need to be within his actual area.
Here in Gympie, AKA the Village of the Damned, I could hear cabs being dispatched all over the northern Brisbane area, Sunshine Coast, Gympie and Maryborough, but I could only hear if a Gympie cab answered. Gympie cabs no longer uses dispatchers from Brisbane near the air port, and instead use their own locally generated MDT and followed up by phone if necessary.
I note that they still maintain their old voice frequency and their ancient AM frequency.
Here in Gympie, AKA the Village of the Damned, I could hear cabs being dispatched all over the northern Brisbane area, Sunshine Coast, Gympie and Maryborough, but I could only hear if a Gympie cab answered. Gympie cabs no longer uses dispatchers from Brisbane near the air port, and instead use their own locally generated MDT and followed up by phone if necessary.
I note that they still maintain their old voice frequency and their ancient AM frequency.
-
- Registered User
- Posts: 156
- Joined: Tue Dec 20, 2011 6:04 pm
Re: Brisbane Taxi Frequencies
AM frequency? Hmmm.
-
- Registered User
- Posts: 45
- Joined: Sun Nov 18, 2012 7:55 am
- Location: Logan Area, QLD
Re: Brisbane Taxi Frequencies
Hate to bump an old thread but I'm goin through the ACMA database of both Black N White Cabs and Yellow Cabs tryin to find a freq close enough for me to listen in on. What I'm unsure about is what ACMA means by 'Assigned Frequency' and 'Related Frequency'. I'm sure one of the two frequencies under those terms is the repeater output freq, but I don't know which term means what. Any help would be appreciated.
Thanks
Erik
Thanks
Erik
This user has retired from the forum.
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Brisbane Taxi Frequencies
Actually, that is a rather circular query.erikn wrote:What I'm unsure about is what ACMA means by 'Assigned Frequency' and 'Related Frequency'. I'm sure one of the two frequencies under those terms is the repeater output freq, but I don't know which term means what. Any help would be appreciated.
If you are looking at the Transmit Frequency, then that is the Assigned Frequency, and the Linked Frequency is the Receive Frequency, and conversely, when looking at the Receive Frequency, then that is the Assigned Frequency, and the Linked Frequency is the Transmit Frequency.
In the case of Repeaters, the Transmit Frequency is the repeater output frequency.
I have never seen the term "Related Frequency".
--
Comint
-
- Registered User
- Posts: 45
- Joined: Sun Nov 18, 2012 7:55 am
- Location: Logan Area, QLD
Re: Brisbane Taxi Frequencies
EDIT: Can receive 463.3375MHz on my analogue scanner but its just outputting 'motorboat' sounding noise interrupted for a millisecond then it just continues. Sounds like Yellow Cabs are running P25 or another digital mode on that channel.Comint wrote:Actually, that is a rather circular query.erikn wrote:What I'm unsure about is what ACMA means by 'Assigned Frequency' and 'Related Frequency'. I'm sure one of the two frequencies under those terms is the repeater output freq, but I don't know which term means what. Any help would be appreciated.
If you are looking at the Transmit Frequency, then that is the Assigned Frequency, and the Linked Frequency is the Receive Frequency, and conversely, when looking at the Receive Frequency, then that is the Assigned Frequency, and the Linked Frequency is the Transmit Frequency.
In the case of Repeaters, the Transmit Frequency is the repeater output frequency.
I have never seen the term "Related Frequency".
--
Comint
Related frequency is probably the same as 'Linked Frequency', maybe ACMA changed the wording around on their online database recently.
Erik
This user has retired from the forum.
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Brisbane Taxi Frequencies
My "Linked Frequency" should have read "Linked Assignment" and as far as I am aware, has been known as that for a number of years.erikn wrote: EDIT: Can receive 463.3375MHz on my analogue scanner but its just outputting 'motorboat' sounding noise interrupted for a millisecond then it just continues. Sounds like Yellow Cabs are running P25 or another digital mode on that channel.
Related frequency is probably the same as 'Linked Frequency', maybe ACMA changed the wording around on their online database recently.
Erik
As for 463.3375 MHz. Depends where you live.
If you live South of Brisbane (Springwood), it is a Yellow Cab Repeater, however if you live further North (Morayfield), it is a DGPS transmission, and appears to have nothing to do with Yellow Cabs.
--
Comint
-
- Registered User
- Posts: 45
- Joined: Sun Nov 18, 2012 7:55 am
- Location: Logan Area, QLD
Re: Brisbane Taxi Frequencies
I live in Rochedale, so it must be DGPS that I'm hearing, not Yellow Cabs analogue. Ah well, its the closest freq I can hear.Comint wrote:My "Linked Frequency" should have read "Linked Assignment" and as far as I am aware, has been known as that for a number of years.erikn wrote: EDIT: Can receive 463.3375MHz on my analogue scanner but its just outputting 'motorboat' sounding noise interrupted for a millisecond then it just continues. Sounds like Yellow Cabs are running P25 or another digital mode on that channel.
Related frequency is probably the same as 'Linked Frequency', maybe ACMA changed the wording around on their online database recently.
Erik
As for 463.3375 MHz. Depends where you live.
If you live South of Brisbane (Springwood), it is a Yellow Cab Repeater, however if you live further North (Morayfield), it is a DGPS transmission, and appears to have nothing to do with Yellow Cabs.
--
Comint
This user has retired from the forum.
- Squire
- Registered User
- Posts: 18
- Joined: Sat Aug 03, 2013 2:04 pm
Re: Brisbane Taxi Frequencies
hi erikn
have a look in this thread where I have found the good analogue voice yellow cabs channels
have a look in this thread where I have found the good analogue voice yellow cabs channels
Uniden UH078SX