Qantas Motorola 400 MHz trunking question
- rredbeak
- Registered User
- Posts: 198
- Joined: Wed Nov 05, 2008 6:44 pm
- Location: ipswich
Qantas Motorola 400 MHz trunking question
With the Base Freq at 463 Mhz and the Channels similar 464-466.
Then why was i getting the CORRECT Tgids on 411 & 412 Mhz,But NO audio on Scan. Went to Manual [the preprogrammed 464-466 Chs] And had full audio but i was on a single ch [not scanning]
The TGID showed up,display was 411 and no audio. Now im sure its programmed right and the squelch disables on scan so i thought alls good
Please help tell me where im wrong.
Cheers Rod
Then why was i getting the CORRECT Tgids on 411 & 412 Mhz,But NO audio on Scan. Went to Manual [the preprogrammed 464-466 Chs] And had full audio but i was on a single ch [not scanning]
The TGID showed up,display was 411 and no audio. Now im sure its programmed right and the squelch disables on scan so i thought alls good
Please help tell me where im wrong.
Cheers Rod
I LOVE AOR scanners, but cant afford the newer ones LOL. So Uniden is it.
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Qantas Motorola 400 MHz trunking question
More information.rredbeak wrote:With the Base Freq at 463 Mhz and the Channels similar 464-466.
Then why was i getting the CORRECT Tgids on 411 & 412 Mhz,But NO audio on Scan. Went to Manual [the preprogrammed 464-466 Chs] And had full audio but i was on a single ch [not scanning]
The TGID showed up,display was 411 and no audio. Now im sure its programmed right and the squelch disables on scan so i thought alls good
Please help tell me where im wrong.
Cheers Rod
What scanner, Offset.
Are you using a Trunk-tracking scanner, or software decode.
--
Comint
- rredbeak
- Registered User
- Posts: 198
- Joined: Wed Nov 05, 2008 6:44 pm
- Location: ipswich
Re: Qantas Motorola 400 MHz trunking question
Yea,Good point. Sorry bout that.
Scanner is the DSE 96 HH
The Freq's were all taken off BrisbaneScan / Trunking/qantas Site including offsets
"Base Frequency: 463.0000 MHz
Step: 25 kHz
Offset: 500
Connect Tone: 105.88Hz
Channels
464.3250
465.6250
465.9500
466.1750
466.5250 "
The INFO ON Brisbanescan IS 100% correct.
Im doing something wrong here in my programming.
Confusing part is on scan theres no audio with the KNOWN audio tgids.
Cheers Rod
PS i was atfirst within a 100M of the Apt Terminal then maybe 5 Kms away.
Scanner is the DSE 96 HH
The Freq's were all taken off BrisbaneScan / Trunking/qantas Site including offsets
"Base Frequency: 463.0000 MHz
Step: 25 kHz
Offset: 500
Connect Tone: 105.88Hz
Channels
464.3250
465.6250
465.9500
466.1750
466.5250 "
The INFO ON Brisbanescan IS 100% correct.
Im doing something wrong here in my programming.
Confusing part is on scan theres no audio with the KNOWN audio tgids.
Cheers Rod
PS i was atfirst within a 100M of the Apt Terminal then maybe 5 Kms away.
I LOVE AOR scanners, but cant afford the newer ones LOL. So Uniden is it.
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Qantas Motorola 400 MHz trunking question
The frequencies, etc., are actually posted on this fourm.rredbeak wrote:Yea,Good point. Sorry bout that.
Scanner is the DSE 96 HH
The Freq's were all taken off BrisbaneScan / Trunking/qantas Site including offsets
"Base Frequency: 463.0000 MHz
Step: 25 kHz
Offset: 500
Connect Tone: 105.88Hz
Channels
464.3250
465.6250
465.9500
466.1750
466.5250 "
The INFO ON Brisbanescan IS 100% correct.
Im doing something wrong here in my programming.
Confusing part is on scan theres no audio with the KNOWN audio tgids.
Cheers Rod
PS i was atfirst within a 100M of the Apt Terminal then maybe 5 Kms away.
Don't know about programming of a DTS96.
The Trunked Radio Site is on the other side of the Airfield to the Passenger Terminals.
--
Comint
- rredbeak
- Registered User
- Posts: 198
- Joined: Wed Nov 05, 2008 6:44 pm
- Location: ipswich
Re: Qantas Motorola 400 MHz trunking question
cant be too much wrong as the 800MHz trunking is fine and ive set the baudrate correctly i think,Ill change it and see.
Ones 3600, the other 9600 cant recall which one for 400MHz motorola.
But its easy enough to find out.
Cheers Rod
Ones 3600, the other 9600 cant recall which one for 400MHz motorola.
But its easy enough to find out.
Cheers Rod
I LOVE AOR scanners, but cant afford the newer ones LOL. So Uniden is it.
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Qantas Motorola 400 MHz trunking question
They are both Motorola Smartnet, so they are BOTH 3600.rredbeak wrote:cant be too much wrong as the 800MHz trunking is fine and ive set the baudrate correctly i think,Ill change it and see.
Ones 3600, the other 9600 cant recall which one for 400MHz motorola.
But its easy enough to find out.
Cheers Rod
--
Comint
- rredbeak
- Registered User
- Posts: 198
- Joined: Wed Nov 05, 2008 6:44 pm
- Location: ipswich
Re: Qantas Motorola 400 MHz trunking question
in motorola dtr96 settings you get the option of either.
Cheers Rod
Cheers Rod
I LOVE AOR scanners, but cant afford the newer ones LOL. So Uniden is it.
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: Qantas Motorola 400 MHz trunking question
Thats because scanner manufacturers lump APCO P25 (which is 9600) in with Motorola.rredbeak wrote:in motorola dtr96 settings you get the option of either.
Cheers Rod
Motorola Smartnet is ONLY 3600.
--
Comint
- rredbeak
- Registered User
- Posts: 198
- Joined: Wed Nov 05, 2008 6:44 pm
- Location: ipswich
Re: Qantas Motorola 400 MHz trunking question
I knew that...NOT Rofl
Cheers Rod
Cheers Rod
I LOVE AOR scanners, but cant afford the newer ones LOL. So Uniden is it.
-
- Registered User
- Posts: 5
- Joined: Tue Nov 22, 2016 8:18 am
Re: Qantas Motorola 400 MHz trunking question
Digital scanners are a pieces
of shit
of shit
- Pumper_50
- Registered User
- Posts: 293
- Joined: Tue Nov 15, 2011 10:11 am
Re: Qantas Motorola 400 MHz trunking question
So is the dribble you manage to mash out of that brain of yours to the keyboard.Xtl05 wrote:Digital scanners are a pieces
of shit
Sent from my SM-T350 using Tapatalk
- Phantom
- Forum Manager
- Posts: 1306
- Joined: Thu May 15, 2008 12:28 pm
- Location: SE QLD
Re: Qantas Motorola 400 MHz trunking question
Wow, a 5 year old topic
Play nice eh?
Play nice eh?