Disable ptt on icom IC41-S?
Forum rules
Aussiescanners takes no responsibility for any modification undertaken, these are to be done at your own risk and should only be performed by those with good knowledge of radio and soldering.
Aussiescanners takes no responsibility for any modification undertaken, these are to be done at your own risk and should only be performed by those with good knowledge of radio and soldering.
-
- Newly Registered Users
- Posts: 2
- Joined: Mon Sep 29, 2014 9:46 am
Disable ptt on icom IC41-S?
I have a hm mike attached so I have no need for the ptt on the handset itself. It's now "sticky" and often my radio will be locked on without me knowing. Is there a way I can disable it either with programming software or by physically removing part of it??
- Phantom
- Forum Manager
- Posts: 1306
- Joined: Thu May 15, 2008 12:28 pm
- Location: SE QLD
Re: Disable ptt on icom IC41-S?
Easiest way to disable it, would be to remove the attached mike!
Failing the removal of the offending mic, you "should" be able to disable PTT via software - simple check box?
Failing the removal of the offending mic, you "should" be able to disable PTT via software - simple check box?
-
- Newly Registered Users
- Posts: 2
- Joined: Mon Sep 29, 2014 9:46 am
Re: Disable ptt on icom IC41-S?
Thx phantom. Just to make sure where on the same pg. The ptt on the hm mike (pictured)
Works fine. I want to disable the one on the radio itself.You do not have the required permissions to view the files attached to this post.
- Phantom
- Forum Manager
- Posts: 1306
- Joined: Thu May 15, 2008 12:28 pm
- Location: SE QLD
Re: Disable ptt on icom IC41-S?
Ok.
I thought you talking about the removable mic.
Check out the software to see if you can disable the PTT.
Failing that, get the mic fixed
I thought you talking about the removable mic.
Check out the software to see if you can disable the PTT.
Failing that, get the mic fixed
-
- Registered User
- Posts: 69
- Joined: Mon Aug 05, 2013 10:10 am
- Location: Birkdale
Re: Disable ptt on icom IC41-S?
Hi I just checked the software and there is no simple way to disable the PTT by software. The easiest way is to remove the switch and if you are going to go to that length of trouble you may as well fit a new one at the same time.Good luck. Regards
Ian
Ian
- Phil
- Administrator
- Posts: 1519
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Re: Disable ptt on icom IC41-S?
dont enter a transmit frequency !
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
-
- Newly Registered Users
- Posts: 2
- Joined: Wed Feb 24, 2016 5:23 pm
- Contact:
Re: Disable ptt on icom IC41-S?
All i had to do was power it on while holding the Ptt button!
-
- Registered User
- Posts: 69
- Joined: Mon Aug 05, 2013 10:10 am
- Location: Birkdale
Re: Disable ptt on icom IC41-S?
Good morning Richard, Turning the unit on while holding the PTT button in will either activate or de-activate the PTT Hold function. Regards YipYip