When monitoring messages with pdw on 148.6375 and 148.5625 i seem to miss the occasional message completely (mostly on .6375)... i have another source and they appear there but miss mine... am getting "100% decode" but still missing some.. any ideas?. Thank you
Sent from my SM-G955F using Tapatalk
Missing messages
-
- Registered User
- Posts: 65
- Joined: Sun Nov 12, 2017 12:16 pm
Missing messages
Last edited by cjl_72 on Wed Mar 21, 2018 12:22 pm, edited 1 time in total.
-
- Registered User
- Posts: 14
- Joined: Fri Feb 03, 2012 4:29 pm
Re: Missing messages
Is this with PDW?
-
- Registered User
- Posts: 65
- Joined: Sun Nov 12, 2017 12:16 pm
Re: Missing messages
Yesjkl090 wrote:Is this with PDW?
Sent from my SM-G955F using Tapatalk
-
- Registered User
- Posts: 65
- Joined: Sun Nov 12, 2017 12:16 pm
Re: Missing messages
Anyone had this happen or possibly know the cause?
Sent from my SM-G955F using Tapatalk
Sent from my SM-G955F using Tapatalk
-
- Registered User
- Posts: 65
- Joined: Sun Nov 12, 2017 12:16 pm
Re: Missing messages
The one that gets them all is 50kms north of me closer to brisbane and i am closer to gold coast... anyone have any ideas?cjl_72 wrote:When monitoring messages with pdw on 148.6375 and 148.5625 i seem to miss the occasional message completely (mostly on .6375)... i have another source and they appear there but miss mine... am getting "100% decode" but still missing some.. using scanner with tap.... any ideas?. Thank you
Sent from my SM-G955F using Tapatalk
Sent from my SM-G955F using Tapatalk
-
- Registered User
- Posts: 12
- Joined: Sat Jun 18, 2011 11:46 pm
Re: Missing messages
Have you got a setting selected somewhere to ignore certain message types? I have filters set to reject "12 minute network heartbeat" messages and other annoying msgs. Check the capcodes of missing msgs and see if they are filtered etc
Sent from my SM-G950F using Tapatalk
Sent from my SM-G950F using Tapatalk
-
- Registered User
- Posts: 116
- Joined: Fri Jan 30, 2015 6:58 am
Re: Missing messages
I used to have the same problem that Smythie has described.
I used to think I was missing messages as well. I would see the needle in PDW go all the way to the right and the decode percentage remained at 100%, but no messages would come up.
I soon realised that I wasn't 'missing' any messages, but PDW was filtering out all of the messages that were being sent across a rejected address.
Regards,
I used to think I was missing messages as well. I would see the needle in PDW go all the way to the right and the decode percentage remained at 100%, but no messages would come up.
I soon realised that I wasn't 'missing' any messages, but PDW was filtering out all of the messages that were being sent across a rejected address.
Regards,
Mitch Baker - VK3GLV
Uniden UBCD396XT, BCT15X, UBCD996T, UBCD436-PT, Tait TM9100, Simoco SRM9000 (VHF + UHF DMAP), Icom IC-2730a, Codan 9323 (Codan 9030 Autotune Antenna), Retevis RT52
Uniden UBCD396XT, BCT15X, UBCD996T, UBCD436-PT, Tait TM9100, Simoco SRM9000 (VHF + UHF DMAP), Icom IC-2730a, Codan 9323 (Codan 9030 Autotune Antenna), Retevis RT52