INFORMATION FOR UBCD436PT AND UBCD536PT OWNERS

Discussion on Uniden technologies, including programming, tutorials, schematics, requests for help and new releases etc
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
Post Reply
User avatar
railscan
Registered User
Posts: 249
Joined: Fri Apr 10, 2009 4:23 pm

INFORMATION FOR UBCD436PT AND UBCD536PT OWNERS

Post by railscan »

INFORMATION FOR UBCD436PT AND UBCD536PT OWNERS RE THE RECENT RELEASE OF THE DMR FIRMWARE UPGRADE IN THE US.

If you have been following this story on a well known overseas forum you will have seen that Uniden America is bascially keeping this latest firmware upgrade in house, that is no international credit card transactions.

The other problem is a difference in ESN (Electronic Serial Numbers) between the North American BCD435/536HP and the Australianised version, (UBCD436/536PT). The Uniden America website (necessary to download and purchase the firmware upgrade) will not accept the UBCD436/536PT ESN's.

I have been in contact with some of the higher ups in Uniden Australia to discuss the situation. WITHOUT making any promises or commitments, they will investigate the proposition of releasing the upgrade here in Australia. One proviso is that it will be only for the Australian UBCD436/536PT and not the North American BCD435/536HP. I am afraid as the non Australian unit were purchased overseas they are not supported here in Australia (my words not theirs).

There is no time frame about this, it is purely in the preliminary stages at the moment, but it is a move forward. I ask that everyone be patient and await the outcome. I know everyone is 'excited' about this, none more so than me, but it is going to take time. Also it may not happen, because of a number of circumstances that I cannot and will not discuss, here or elsewhere.

When I find out more I will let everyone know.

Russell Bryant
dags19
Registered User
Posts: 164
Joined: Sat Mar 30, 2013 4:04 pm

Re: INFORMATION FOR UBCD436PT AND UBCD536PT OWNERS

Post by dags19 »

why not just get a prepaid master card visa etc
User avatar
railscan
Registered User
Posts: 249
Joined: Fri Apr 10, 2009 4:23 pm

Re: INFORMATION FOR UBCD436PT AND UBCD536PT OWNERS

Post by railscan »

dags19 wrote:why not just get a prepaid master card visa etc
That may only work if you have the US model and register it on the Uniden America website. If you have the Australian model, as clearly mentioned in the title, you cannot register it and as such cannot download and install the upgrade. That is irrespective of whether you have a US, Australian or wherever issued credit or debit card.

R
dags19
Registered User
Posts: 164
Joined: Sat Mar 30, 2013 4:04 pm

Re: INFORMATION FOR UBCD436PT AND UBCD536PT OWNERS

Post by dags19 »

Sorry i mean if you have bought an American model use a prepaid credit card
User avatar
railscan
Registered User
Posts: 249
Joined: Fri Apr 10, 2009 4:23 pm

Re: INFORMATION FOR UBCD436PT AND UBCD536PT OWNERS

Post by railscan »

dags19 wrote:Sorry i mean if you have bought an American model use a prepaid credit card
As far as I am aware, the Uniden America website will not accept credit cards that do not have verifiable US / Canada address. The card has to be issued in America / Canada otherwise your purchase will fail.

R
Post Reply