Page 1 of 1
help wanted identifying make to beam
Posted: Sun Oct 21, 2012 2:09 pm
by hamtrainee
antanna 2.jpg
Hi everyone, dose anybody happen to know what make of antenna this 5 element beam is (look at the gamma match) there are no traps and no sticker. i know its from around the 80,s and its 27 or 28 mhz but i am trying to get a hold of any info for it so i can re tune it and reinstall properly
thanks in advance Joe
Re: help wanted identifying make to beam
Posted: Sun Oct 21, 2012 6:25 pm
by alinco21
Hi Joe,
1980's 27mhz CB for sure.
What freq did yo want to retune it to?
there are pleanty of info on the web for that, and even you tube.
http://signalengineering.com/ultimate/yagi.html
might help
Re: help wanted identifying make to beam
Posted: Sun Oct 21, 2012 7:29 pm
by hamtrainee
thanks for the reply. im wish to use it for 10mtr and 11 with a tunner
Re: help wanted identifying make to beam
Posted: Mon Oct 22, 2012 1:57 am
by Spectre
Was it the Werner Wulf antennas that used such a style of hairpin match?
Clean it up and leave it as is... as you said you're going to be using an antenna tuner anyway
