Page 3 of 4
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 12:56 am
by fire_rescue
i got north coast ctcss same as south east and brisbane is different
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 1:09 am
by Comint
fire_rescue wrote:i got north coast ctcss same as south east and brisbane is different
And that is exactly what is said above.
--
Comint
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 1:39 am
by Phil
the reason for this is the geographical distance means that they dont have to worry about interference
Comint wrote:
NIS means Not In Service, and Toowoomba has been in use for years.
I believe Vote Group 83 is Warwick Area.
--
Comint
i believe you are correct my bad as for the original part Region 3 does not consist of Nambour, Maroochy just goes to show how much i didn't see it
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 5:37 am
by bodyguard
Comint wrote:youngn wrote:Does anyone have the frequency for channel 37?
I can't find it anywhere
Obviously didn't look too hard. 465.0375 MHz
--
Comint
Comint where did you find that ? I too couldn't find it either
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 8:19 pm
by youngn
bodyguard wrote:Comint wrote:youngn wrote:Does anyone have the frequency for channel 37?
I can't find it anywhere
Obviously didn't look too hard. 465.0375 MHz
--
Comint
Comint where did you find that ? I too couldn't find it either
Neither could brisbanescan when I asked him...
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 9:18 pm
by fire_rescue
isnt it mt cootha?
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 9:22 pm
by Comint
bodyguard wrote:
Comint where did you find that ? I too couldn't find it either
This is where I downloaded it from, about 11 months ago, and which has since been deleted.
QFRS_Channels_2009-10-21.png
--
Comint
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 9:27 pm
by fire_rescue
youngn if ur working on the new correct list that is up to date can u put it up for us
Re: Firecom Southeast Frequencies
Posted: Thu Sep 16, 2010 10:16 pm
by Phil
like i said my list is current however the one that was originally up was a different one, mine also has the current tones for different channels
Re: Firecom Southeast Frequencies
Posted: Tue Sep 21, 2010 7:33 pm
by Phil
Channel 37 has now been added to the first post
Re: Firecom Southeast Frequencies
Posted: Tue Jan 03, 2012 3:31 pm
by phattdog
moved
Re: Firecom Southeast Frequencies
Posted: Tue Jan 03, 2012 5:00 pm
by Comint
phattdog wrote:moved out to laidley recently and been doing a bit of searching and found firecom S.E on 489.050
You will find that 489.050 (which doesn't show on the ACMA Database) is 21.4 MHz (twice the IF) from 467.650 MHz (Ch 26), which happens to be the Firecom SE frequency on Mt Perseverance, which is about 34 km NW of Laidley.
This is a common problem with a lot of scanners.
--
Comint
Re: Firecom Southeast Frequencies
Posted: Thu Dec 18, 2014 6:48 pm
by fire_rescue
462.7625 not operating currently listening thru Mt Tamborine one 461.568750
Re: Firecom Southeast Frequencies
Posted: Thu Dec 18, 2014 7:14 pm
by Phantom
Look out the window....
Not operating could be linked to the storm that is passing thru the area.
I would not get too carried away just yet, give it some time and "it never happened"
Re: Firecom Southeast Frequencies
Posted: Thu Dec 18, 2014 7:41 pm
by fire_rescue
umm been like this for a week ? so could be a multiple issues?
Re: Firecom Southeast Frequencies
Posted: Thu Dec 25, 2014 9:09 am
by terryhaynes
462.7625 still not operational as 25-12-14
Re: Firecom Southeast Frequencies
Posted: Mon Mar 09, 2015 5:51 pm
by fire_rescue
They have moved freq 461.41875 turnouts are now on this freq off mt cootha for SE Region
Re: Firecom Southeast Frequencies
Posted: Sat Nov 26, 2022 12:04 pm
by Taiter2018
Stretch wrote: ↑Sun Nov 09, 2008 1:58 pm
Further to my above two posts (probably should've edited them and condensed into one if I knew how much I would write but anyway)
Turnout channel Details below;
461.5625
Actual Frequency is 461.56875
461.56875
Transmit
452.06875
Receive
Located on Mount Tamborine.
461.7582
Actual Frequency is 461.75625
461.75625
Transmit
452.25625
Receive
Located on Mt Coot-tha
461.9287
Couldn't even find on ACMA.
462.7625
462.7625
Transmit
453.2625
Receive
Located on Mount Coot-tha.
Mitch
can you confirm these are still in use? Not seeming to pick anything up
Re: Firecom Southeast Frequencies
Posted: Sun Nov 27, 2022 1:42 pm
by Phil
461.41875 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Energex Site Constitution Hill Sir Samuel Griffith Dr MOUNT COOT-THA QLD 4066
461.56875 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Powerlink Site Tamborine-Oxenford Rd MOUNT TAMBORINE QLD 4210
461.75625 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Energex Site Constitution Hill Sir Samuel Griffith Dr MOUNT COOT-THA QLD 4066
461.78125 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) PRSC Water Tower Site adj 54 Minerva Ct EATONS HILL QLD 4037
461.84375 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Energex Site Bilbrough Lookout SPRINGBROOK QLD 4213
461.96875 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Police Site off Seaview Rd MOUNT COTTON QLD 4165
Re: Firecom Southeast Frequencies
Posted: Sat Apr 08, 2023 1:04 pm
by Taiter2018
Phil wrote: ↑Sun Nov 27, 2022 1:42 pm
461.41875 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Energex Site Constitution Hill Sir Samuel Griffith Dr MOUNT COOT-THA QLD 4066
461.56875 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Powerlink Site Tamborine-Oxenford Rd MOUNT TAMBORINE QLD 4210
461.75625 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Energex Site Constitution Hill Sir Samuel Griffith Dr MOUNT COOT-THA QLD 4066
461.78125 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) PRSC Water Tower Site adj 54 Minerva Ct EATONS HILL QLD 4037
461.84375 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Energex Site Bilbrough Lookout SPRINGBROOK QLD 4213
461.96875 MHz QUEENSLAND FIRE AND EMERGENCY SERVICES (84379) Police Site off Seaview Rd MOUNT COTTON QLD 4165
Tried these but none seem to work. Should they be programmed in analogue or digital? Do you happen to have a screenshot of a programmed file I can use as a reference?