G'day everyone,
Bit of a quick question regarding Tait TM8200 radios. I currently own a TM8200 (VHF) with a remote graphical display head. Basically what i want to do is use both 2M and 70CM repeaters via the one control head. Now i have heard that you can 'daisy chain' two torsos together to make a cross band repeater, is this possible for the use of 2m as well as 70CM amateur repeaters? if so what programming would be required.
Cheers
Ben Rothacker
VK3FXBR
Tait TM8200
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
-
- Registered User
- Posts: 38
- Joined: Mon Aug 29, 2016 4:20 pm
Tait TM8200
APX2500, XTL5000, XTS2500 UBCD436PT, UBC73XLT, SRM9000 (9022) +DMAP, Codan 9323 + 9350, Motorola MCS2000 UHF+VHF, TP9100, TM9100, TM8200, DM3400, IC-718, FT 70-D
- Phil
- Administrator
- Posts: 1517
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Re: Tait TM8200
Its my understanding that what you are wanting is the equivalent to the Simoco DMAP Board which allows this type of config.
For Tait it is a TM8260 im not sure if you can use an existing radio however.
For Tait it is a TM8260 im not sure if you can use an existing radio however.
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
- Phantom
- Forum Manager
- Posts: 1306
- Joined: Thu May 15, 2008 12:28 pm
- Location: SE QLD
Re: Tait TM8200
Don’t believe you can configure the Tait in the way you mention. Best to simply get a dual band that is setup for the job. No config required and keeps you within the LCD requirements.
-
- Registered User
- Posts: 38
- Joined: Mon Aug 29, 2016 4:20 pm
Re: Tait TM8200
Cheers guys, I think I might just stick to the VHF tait, as UHF repeaters aren't that common
VK3FXBR
VK3FXBR
APX2500, XTL5000, XTS2500 UBCD436PT, UBC73XLT, SRM9000 (9022) +DMAP, Codan 9323 + 9350, Motorola MCS2000 UHF+VHF, TP9100, TM9100, TM8200, DM3400, IC-718, FT 70-D