HI all,
I have recently ordered a 396XT, and having not had a scanner for around 10 years, I am looking forward to getting it up and running. I am based on the sunny Northside of Brisbane, but tend to get around QLD fairly regularly. My last scanner was a Uniden also, although it sounds like the 396 will be somewhat more complicated (though I doubt that it will pick up mobile phones like I was able to do in NZ back in the day....)
Is there a list - all in one place - of the frequencies etc currently in use in Brisbane, or am I best to run through the other postings in this forum and input those into the scanner? I am interested in emergency services, air traffic, police etc.
dreamboat
Programming Uniden 396XT for Brisbane/QLD
-
- Newly Registered Users
- Posts: 2
- Joined: Fri Sep 02, 2011 9:49 pm
Programming Uniden 396XT for Brisbane/QLD
Uniden 396XT
- bodyguard
- Registered User
- Posts: 1210
- Joined: Fri Aug 31, 2007 7:54 pm
- Location: Brisbane, QLD
Re: Programming Uniden 396XT for Brisbane/QLD
Hey there Dreamboat, welcome man enjoy ya stay
I am sure I can find some freqs for you
I am sure I can find some freqs for you
Cheers
BG
UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P
BG
UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P
- Scannersplitterguy
- Registered User
- Posts: 557
- Joined: Sun Apr 12, 2009 10:44 pm
- Location: Sunshine Coast, QLD
Re: Programming Uniden 396XT for Brisbane/QLD
I think that scanner has a pre-programmed 'Service' search. It will scan the police and airbands etc.
All you have to do is set the scanner to automatically save new channels it finds.
That would give you a good head start.
All you have to do is set the scanner to automatically save new channels it finds.
That would give you a good head start.
http://www.scannerantennasplitter.com
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
- bodyguard
- Registered User
- Posts: 1210
- Joined: Fri Aug 31, 2007 7:54 pm
- Location: Brisbane, QLD
Re: Programming Uniden 396XT for Brisbane/QLD
that would be if its an australian model, if its a US model that might cause some griefScannersplitterguy wrote:I think that scanner has a pre-programmed 'Service' search. It will scan the police and airbands etc.
All you have to do is set the scanner to automatically save new channels it finds.
That would give you a good head start.
Cheers
BG
UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P
BG
UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P
- rochedalescan
- Founder
- Posts: 1632
- Joined: Fri Jun 01, 2007 5:08 pm
- Location: Brisbane
- Contact:
Re: Programming Uniden 396XT for Brisbane/QLD
I doubt you will pick up any QPS where you are as its all encrypted around there I am pretty sure. But for QFRS, QAS other things it will work fine.
Have a look in the subforums "Queensland --> "Emergency Services" --> pick your service and the first few topics etc should contain most of the information you will need frequency wise or you can always give us a yell
Welcome to the forums
Cheers Shane
Have a look in the subforums "Queensland --> "Emergency Services" --> pick your service and the first few topics etc should contain most of the information you will need frequency wise or you can always give us a yell
Welcome to the forums
Cheers Shane
Shane Logan
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
- bodyguard
- Registered User
- Posts: 1210
- Joined: Fri Aug 31, 2007 7:54 pm
- Location: Brisbane, QLD
Re: Programming Uniden 396XT for Brisbane/QLD
QFRS 467.325 (Eatons Hill)
QAS 413.2125 (Brendale)
QPS 469.2125 (thats Narangba area)
QAS 413.2125 (Brendale)
QPS 469.2125 (thats Narangba area)
Cheers
BG
UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P
BG
UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P
- Phil
- Administrator
- Posts: 1520
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Re: Programming Uniden 396XT for Brisbane/QLD
if in doubt hit me up i can add all the data for South East Queensland for all the Emergency Services, Air Traffic and a few other items if you want
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
-
- Newly Registered Users
- Posts: 2
- Joined: Fri Sep 02, 2011 9:49 pm
Re: Programming Uniden 396XT for Brisbane/QLD
Not too sure that we should resort to violence Phil, but I would certainly appreciate any list of data that you can put together.
dreamboat
dreamboat
Uniden 396XT