Icom ic-f50 / OPC-966u driver

Discussion on Icom technologies, including programming, tutorials, schematics, requests for help and new releases etc
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
Post Reply
Veigrillen
Newly Registered Users
Posts: 1
Joined: Thu Jul 21, 2011 8:55 am

Icom ic-f50 / OPC-966u driver

Post by Veigrillen »

Hello all.
I were about to program my ic-f51 radio today, but as i was about to start i noticed that the driver software cd was broken.
After 5 hours of google'ing i almost gave up..
Does anyone of you got a working driver for the OPC-966U cable? (USB) windows 7 or windows xp

Thank you so mutch in advance..

Arne :roll:
Top
User avatar
rochedalescan
Founder
Posts: 1632
Joined: Fri Jun 01, 2007 5:08 pm
Location: Brisbane
Contact:
Contact rochedalescan

Re: Icom ic-f50 / OPC-966u driver

Post by rochedalescan »

It may be in this IC-CF50 programing file ? http://aussiescanners.com/forum/viewtop ... 265&t=3924
Shane Logan
Aussiescanners Founder

Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
Top
User avatar
Phil
Administrator
Posts: 1517
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: Icom ic-f50 / OPC-966u driver

Post by Phil »

no the F50 does not comes with the drivers for the cable. the driver should be a generic profilic driver and i may have the driver on one of my computers
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Top
ziggybyrne
Registered User
Posts: 47
Joined: Tue Aug 24, 2010 8:34 pm

Re: Icom ic-f50 / OPC-966u driver

Post by ziggybyrne »

I use a generic driver and usb converter from jaycar and it works quite well for icom f60 and simoco 9022 although no luck with ic400 pro and ic 221. It can take a bit of tinkering around with to find the correct port though.
Top
Post Reply

Return to “Icom”