Hervey Bay/Maryborough.

This forum is a collective database of frequencies and information (callsigns, talk group ID's, channel allocations etc) for Queensland
ryanherveybay
Registered User
Posts: 15
Joined: Thu Sep 02, 2010 6:16 pm
Location: Hervey Bay

Hervey Bay/Maryborough.

Post by ryanherveybay » Thu Sep 02, 2010 6:23 pm

Hi I was Wondering If Any one would have the main frequencies for:
Vkr Maryborouh,
FireCom North Coast,
And QAS
For The Hervey Bay/Maryborough Area.

Thanks

User avatar
Phantom
Forum Manager
Posts: 1305
Joined: Thu May 15, 2008 12:28 pm
Location: SE QLD

Re: Hervey Bay/Maryborough.

Post by Phantom » Thu Sep 02, 2010 7:29 pm

Welcome to the forum!

User avatar
Phil
Administrator
Posts: 1489
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: Hervey Bay/Maryborough.

Post by Phil » Thu Sep 02, 2010 8:14 pm

VKR - 468.0000 comes off Takura Hill works well out to Point Vernon and up north to Childers
QAS
  • - 413.1875 - Ghost Hill
    - 414.8125 - Takura Hill
    - 79.6375 - Takura Hill
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96
Motorola GP328, GP338, GP328 Plus, XTS3000, GM300, DP3400 VHF x2, DP4801e, DP4801ex, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG

ryanherveybay
Registered User
Posts: 15
Joined: Thu Sep 02, 2010 6:16 pm
Location: Hervey Bay

Re: Hervey Bay/Maryborough.

Post by ryanherveybay » Sat Sep 04, 2010 8:09 pm

Thanks For That BrisbaneScan :)
Would Anyone Have A list of Call Signs For QPS For the area cause H'bay & M'borough both have several streets with the same name and it gets a bit confusing sometimes thanks :)

User avatar
Phantom
Forum Manager
Posts: 1305
Joined: Thu May 15, 2008 12:28 pm
Location: SE QLD

Re: Hervey Bay/Maryborough.

Post by Phantom » Sat Sep 04, 2010 8:13 pm

Maybe "Hotel XXX" for Herery Bay and "Mike XXX" for Maryborough ...??

ryanherveybay
Registered User
Posts: 15
Joined: Thu Sep 02, 2010 6:16 pm
Location: Hervey Bay

Re: Hervey Bay/Maryborough.

Post by ryanherveybay » Sat Sep 04, 2010 9:28 pm

no everything goes through as MikeBravo XXX cause its the Maryborough Police District and Everything Come From Maryborough VKR

User avatar
Phil
Administrator
Posts: 1489
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: Hervey Bay/Maryborough.

Post by Phil » Sat Sep 04, 2010 9:37 pm

when i was up there the other week all i was hearing was numbers no Alpha Tagging on any of the QPS Channels until i was in Sunshine Coast and Bundaberg Districts
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96
Motorola GP328, GP338, GP328 Plus, XTS3000, GM300, DP3400 VHF x2, DP4801e, DP4801ex, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG

ryanherveybay
Registered User
Posts: 15
Joined: Thu Sep 02, 2010 6:16 pm
Location: Hervey Bay

Re: Hervey Bay/Maryborough.

Post by ryanherveybay » Sat Sep 04, 2010 9:45 pm

i think it depends on what mood they are in cause tonight some units + the female vkr person was using the alpha tagging but the male vkr person was using just the numbers along with some units using just the numbers.

User avatar
Phil
Administrator
Posts: 1489
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: Hervey Bay/Maryborough.

Post by Phil » Sat Sep 04, 2010 9:52 pm

i was hearing alot of Bravo Units do Maryborough go through Bundy or something
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96
Motorola GP328, GP338, GP328 Plus, XTS3000, GM300, DP3400 VHF x2, DP4801e, DP4801ex, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG

ryanherveybay
Registered User
Posts: 15
Joined: Thu Sep 02, 2010 6:16 pm
Location: Hervey Bay

Re: Hervey Bay/Maryborough.

Post by ryanherveybay » Sat Sep 04, 2010 10:10 pm

No Maryborough all goes through maryborough Vrk but some maryborough units may travel to bundy and vica versa from what i can work out from a google search that led me to another topic on here bundy should be using BU so BravoUniform which they may just shorten to Bravo?

User avatar
Phil
Administrator
Posts: 1489
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: Hervey Bay/Maryborough.

Post by Phil » Sat Sep 04, 2010 10:14 pm

driving around Bundy all i heard was Bravo
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96
Motorola GP328, GP338, GP328 Plus, XTS3000, GM300, DP3400 VHF x2, DP4801e, DP4801ex, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG

ryanherveybay
Registered User
Posts: 15
Joined: Thu Sep 02, 2010 6:16 pm
Location: Hervey Bay

Re: Hervey Bay/Maryborough.

Post by ryanherveybay » Sat Sep 04, 2010 10:23 pm

yeah id guess that would of been bundy police shortening it down to just bravo. i havent taken the scanner to bundy with me yet ill take it on the next trip and let you know what callsigns i hear

User avatar
andrewd66j
Registered User
Posts: 19
Joined: Sat Sep 03, 2011 6:48 pm

Re: Hervey Bay/Maryborough.

Post by andrewd66j » Sat Sep 03, 2011 7:06 pm

Hervey Bay / Maryborough VKR

There are the ones I've found so far.


468.000 (ch 14) Takura Hill
468.300 (ch 38) Ghost Hill
469.300 (ch 118) Gympie area?
469.375 (ch 124) Maryborough

Vkfour
Senior Member
Posts: 365
Joined: Tue Oct 05, 2010 11:27 am

Re: Hervey Bay/Maryborough.

Post by Vkfour » Sun Sep 04, 2011 7:23 am

469.300 is for Maryborough Police and covers Tairo South and out towards the South Burnett. It is on Mt Kanigan but it is sometimes used for Maryborough units talking to VKR Gympie and vice versa and Gympie units out along the South Burnett highway because conditions aren't that good out there. Recently, Gympie has their own frequency on Mt Corella for this area. Gympie is about the only place that doesn't use alpha tags as Gympie is just as easy to say as golf yankee.

User avatar
andrewd66j
Registered User
Posts: 19
Joined: Sat Sep 03, 2011 6:48 pm

Re: Hervey Bay/Maryborough.

Post by andrewd66j » Sun Sep 04, 2011 5:14 pm

So is 118 a stand alone or part of a vote group?

Re: MB & HB, the ACMA site shows 2 QPS frequencies on Fraser Isalnd. 468.175 at Eurong and 468.950 at Sandy Cape. Are these part of the Maryborough vote group or the Bundy Vote group, 1 of each or stand alone?
I'd love to plug my lappy into a radio to get the vote groups. Some of the lists I've seen show up to 10 channels in a vote group. I always thought there'd be no more than 6 due to the time it takes to aquire an RX channel. Does anyone have an accurate list or a good map of the channel plan?

User avatar
Stretch
Registered User
Posts: 3527
Joined: Thu Aug 09, 2007 8:29 pm
Location: Gold Coast
Contact:

Re: Hervey Bay/Maryborough.

Post by Stretch » Sun Sep 04, 2011 10:52 pm

andrewd66j wrote:So is 118 a stand alone or part of a vote group?

Re: MB & HB, the ACMA site shows 2 QPS frequencies on Fraser Isalnd. 468.175 at Eurong and 468.950 at Sandy Cape. Are these part of the Maryborough vote group or the Bundy Vote group, 1 of each or stand alone?
I'd love to plug my lappy into a radio to get the vote groups. Some of the lists I've seen show up to 10 channels in a vote group. I always thought there'd be no more than 6 due to the time it takes to aquire an RX channel. Does anyone have an accurate list or a good map of the channel plan?
There's a program that does that???
Mitch Rogers

User avatar
andrewd66j
Registered User
Posts: 19
Joined: Sat Sep 03, 2011 6:48 pm

Re: Hervey Bay/Maryborough.

Post by andrewd66j » Mon Sep 05, 2011 8:30 am

Yep. Just get the Tait program and cable, plug it into the mic socket and "read" the radio. Takes about 40 seconds.

User avatar
Phil
Administrator
Posts: 1489
Joined: Sun Jun 03, 2007 8:51 pm
Location: Southside of Brisbane, Qld

Re: Hervey Bay/Maryborough.

Post by Phil » Mon Sep 05, 2011 4:30 pm

yes for every radio there is a peice of software. if you can get your hands on one of there radios and read it then you will have the channel plan, scan groups (vote groups) and everything you would need.
Phil
Forum Administrator
phil@aussiescanners.com.au

Uniden UBCD996T, RH96
Motorola GP328, GP338, GP328 Plus, XTS3000, GM300, DP3400 VHF x2, DP4801e, DP4801ex, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG

Comint
Senior Member
Posts: 1609
Joined: Sat Mar 22, 2008 5:17 pm

Re: Hervey Bay/Maryborough.

Post by Comint » Mon Sep 05, 2011 5:37 pm

andrewd66j wrote:So is 118 a stand alone or part of a vote group?

Re: MB & HB, the ACMA site shows 2 QPS frequencies on Fraser Isalnd. 468.175 at Eurong and 468.950 at Sandy Cape. Are these part of the Maryborough vote group or the Bundy Vote group, 1 of each or stand alone?
The ACMA Site also shows that:-

Eurong is Linked to Maryborough Police Station via Double Island Point, and

Sandy Cape is Linked to Maryborough Poice Station via Ghost Hill.

--
Comint
Last edited by Comint on Tue Oct 02, 2012 11:38 am, edited 1 time in total.

User avatar
bagman002
Registered User
Posts: 88
Joined: Wed Feb 08, 2012 1:30 pm
Location: Sunshine Coast - Nambour

Re: Hervey Bay/Maryborough.

Post by bagman002 » Wed Feb 08, 2012 11:04 pm

I hope someone is still active on such an old topic.

I am a new member and was just wondering if someone knew the frequencies for FireCom NorthCoast for the Hervey Bay area?

The code that I thought it was doesnt work, I was listening to a live stream while i was testing my radio and it would not pick up anything.

I hope that someone can help me as my radio is not a scanner just programmable.

Brent
Sold my Uniden 93XLT and now using Uniden 396XT

Post Reply