Welcome to the Aussie Scanners group, register today and join in the fun!!!  The main website, forum and tapatalk have all been updated...  Why not introduce yourself in the member introductions forum ? ...

I'm a new member and I feel great.

A place for all new members to the forum to introduce themselves, tell us a little about you, your radio experiences, and anything else relevant

I'm a new member and I feel great.

Postby Basada1955_ » Sat Aug 16, 2014 1:51 pm

Hi all the name is Steve and I have a GME TX4500. I use to listen to frequency 468.00 local police channel but they recently changed frequency. Do any members know what frequency they are using now in Charters Towers.
Last edited by Basada1955_ on Sat Aug 16, 2014 5:14 pm, edited 1 time in total.
Basada1955_
Registered User
 
Posts: 8
Joined: Sat Aug 16, 2014 12:45 pm

Re: I'm a new member and I feel great.

Postby Comint » Sat Aug 16, 2014 4:27 pm

Basada1955_ wrote:Hi all the name is Steve and I have a GME TX4500. I use to listen to frequency 468.00 local police channel but they recently changed frequency. Do any members what frequency they are using now in Charters Towers.

Try 468.3625

--
Comint
Comint
Senior Member
 
Posts: 1601
Joined: Sat Mar 22, 2008 5:17 pm

Re: I'm a new member and I feel great.

Postby youngn » Sat Aug 16, 2014 5:05 pm

Welcome to the forum Steve!
"YOUNGN"
User avatar
youngn
Forum Manager
 
Posts: 497
Joined: Sun Aug 24, 2008 11:55 am
Location: Rochedale South

Re: I'm a new member and I feel great.

Postby Basada1955_ » Sat Aug 16, 2014 5:13 pm

Thanks mate only been here a few hours now but have already learnt a lot. I enjoyed reading the post on upgrading your GME to 80 channel. Very good info as I didn't know you could do that upgrade yourself
Basada1955_
Registered User
 
Posts: 8
Joined: Sat Aug 16, 2014 12:45 pm

Re: I'm a new member and I feel great.

Postby Basada1955_ » Sat Aug 16, 2014 5:20 pm

Comint I tried to get that frequency in my GME TX4500 it is only good to 2 decimal places. What else can I do? I really need someone with a scanner to check if that frequency is correct. if it is can a radio tech get me that frequency in my set?
Basada1955_
Registered User
 
Posts: 8
Joined: Sat Aug 16, 2014 12:45 pm

Re: I'm a new member and I feel great.

Postby Comint » Sat Aug 16, 2014 11:19 pm

Basada1955_ wrote:Comint I tried to get that frequency in my GME TX4500 it is only good to 2 decimal places. What else can I do? I really need someone with a scanner to check if that frequency is correct. if it is can a radio tech get me that frequency in my set?

Not familiar with the GME radios, but even for 40 channel UHFCB it would need three decimal places, and four decimal places for 80 channel UHFCB.

Have a look here for the QPS frequencies.

--
Comint
Comint
Senior Member
 
Posts: 1601
Joined: Sat Mar 22, 2008 5:17 pm

Re: I'm a new member and I feel great.

Postby Phantom » Sun Aug 17, 2014 7:21 am

See pg18 of the manual.
You might need to set 12.5 steps
It will assist you in installing the frequency into the radio.
Mentions that a frequency such as 468.425 will display as 468.42 - the 5 will not display.
User avatar
Phantom
Forum Manager
 
Posts: 1304
Joined: Thu May 15, 2008 12:28 pm
Location: SE QLD


Return to Member Introductions

Who is online

Users browsing this forum: No registered users and 16 guests

cron