help wanted identifying make to beam

Brag about your radio and scanner (home, mobile, work, handheld) installations here, post photos and give us the specifications of each device
Post Reply
hamtrainee
Newly Registered Users
Posts: 2
Joined: Sat Oct 08, 2011 9:07 pm

help wanted identifying make to beam

Post by hamtrainee »

antanna 2.jpg
Hi everyone, dose anybody happen to know what make of antenna this 5 element beam is (look at the gamma match) there are no traps and no sticker. i know its from around the 80,s and its 27 or 28 mhz but i am trying to get a hold of any info for it so i can re tune it and reinstall properly
thanks in advance Joe
You do not have the required permissions to view the files attached to this post.
alinco21
Senior Member
Posts: 703
Joined: Sat Jun 02, 2007 5:27 pm
Location: Earth around the Gold Coast Area.

Re: help wanted identifying make to beam

Post by alinco21 »

Hi Joe,

1980's 27mhz CB for sure.
What freq did yo want to retune it to?
there are pleanty of info on the web for that, and even you tube.

http://signalengineering.com/ultimate/yagi.html

might help
hamtrainee
Newly Registered Users
Posts: 2
Joined: Sat Oct 08, 2011 9:07 pm

Re: help wanted identifying make to beam

Post by hamtrainee »

thanks for the reply. im wish to use it for 10mtr and 11 with a tunner
User avatar
Spectre
Registered User
Posts: 76
Joined: Sat Oct 06, 2012 11:40 am
Location: Sunraysia, Australia.

Re: help wanted identifying make to beam

Post by Spectre »

Was it the Werner Wulf antennas that used such a style of hairpin match? :?


Clean it up and leave it as is... as you said you're going to be using an antenna tuner anyway :twisted:
Equip: Uniden 57XLT, 780XLT, 895XLT, Realistic Pro-2020, Pro-2025 & Pro-2040
Post Reply