Siren amps
-
- Registered User
- Posts: 7
- Joined: Wed Jun 03, 2009 12:06 pm
- Location: mt gravatt
Siren amps
Hi People! anybody in the job that knows what brand/model of siren amps are used in QFRS, QAS and QPS ?
Edited by Rochedalescan: Please don't use shorthand/ Post multiple threads of the same topic.
Welcome to the forums
Edited by Rochedalescan: Please don't use shorthand/ Post multiple threads of the same topic.
Welcome to the forums
-
- Registered User
- Posts: 251
- Joined: Wed Nov 26, 2008 10:19 am
Re: Siren amps
if u want their supplier they are at crockford st banyo and the website is www.britaxae.com.au (thats the emergency lights/sirens website for them)
- eggcarton
- Registered User
- Posts: 37
- Joined: Fri Oct 15, 2010 9:13 pm
Re: Siren amps
Sorry to bump a year old thread but I thought that someone else may need help.
I have spent quite a while trying to find out what they are.
This is an excerpt of a guide I made for my own reference so it is written that way.
Police
Nautech siren used by the police cars. This siren is installed on vehicles which are nicknamed as the 'Nautech' vehicles. These vehicles are basically the marked sedan police cars. Uses a Code 3 C-Series speaker
Hazard 2000 series, and has the worst setup. When first turned on it sounds the Phaser for about 1 second before switching to the wail. It has a similar frequency range to the Able 2 Gen1 sirens, except a little faster and a couple of tones lower. Most of the time the police will keep it set to yelp, which is activated using the horn or on some new vehicles a rotary knob. This siren is also signficantly quieter than other sirens. Speaker is a Hazard 810-002.
A police bike has a very distinctive tone. The wail sounds like another kind of Chinese made siren, except it is using the square wave tones rather than the standard sine. This siren is made as part of a BMW police bike package, so I am not sure what they use on the Yamahas.
Fire
Signal Vehicle (Unknown model) has been used for a while, and siren tones have changed over that time. Speaker is a Federal Signal CP100 for the Mercs and a Dynamax or Whelen SA315 for the Scanias. Some (1 confirmed) also has a Federal Signal Rumbler.
Rural Fire uses a variety of sirens because of their age.
Ambulance
Newer Merc vehicles have a siren that sounds like its made in China.
Previous (Most common) have the 'trip' siren as I call it. Slowly comes up and then 'trips' over its peak and falls back down quickly. Still not 100% sure who made this but it could possibly be made by a NSW company called Impart. I sent them an email and they said they did make them for QAS, aswell as for NSWFB, for which I have also found a vehicle with the same siren 'accent'.
Rapid response vehicles use the Hazard 'Slic' 1000 Series.
I heard once that Code 3 siren amp was used at one stage although I have not heard one.
Older ambulances use a Hazard siren that also has a dual mode on some vehicles. This siren is still used in SA and is common in VIC.
Sites
Code 3/Britax
http://www.code3pse.com
http://www.britaxae.com.au/
Nautech
http://www.nautech.com/
Hazard Systems
http://hazard.com.au
Federal Signal
http://www.fedsig.com/
Signal Vehicle
http://star1889.com/
Impart
http://www.impartsp.com.au/
Whelen
http://www.whelen.com/home.php
I have spent quite a while trying to find out what they are.
This is an excerpt of a guide I made for my own reference so it is written that way.
Police
Nautech siren used by the police cars. This siren is installed on vehicles which are nicknamed as the 'Nautech' vehicles. These vehicles are basically the marked sedan police cars. Uses a Code 3 C-Series speaker
Hazard 2000 series, and has the worst setup. When first turned on it sounds the Phaser for about 1 second before switching to the wail. It has a similar frequency range to the Able 2 Gen1 sirens, except a little faster and a couple of tones lower. Most of the time the police will keep it set to yelp, which is activated using the horn or on some new vehicles a rotary knob. This siren is also signficantly quieter than other sirens. Speaker is a Hazard 810-002.
A police bike has a very distinctive tone. The wail sounds like another kind of Chinese made siren, except it is using the square wave tones rather than the standard sine. This siren is made as part of a BMW police bike package, so I am not sure what they use on the Yamahas.
Fire
Signal Vehicle (Unknown model) has been used for a while, and siren tones have changed over that time. Speaker is a Federal Signal CP100 for the Mercs and a Dynamax or Whelen SA315 for the Scanias. Some (1 confirmed) also has a Federal Signal Rumbler.
Rural Fire uses a variety of sirens because of their age.
Ambulance
Newer Merc vehicles have a siren that sounds like its made in China.
Previous (Most common) have the 'trip' siren as I call it. Slowly comes up and then 'trips' over its peak and falls back down quickly. Still not 100% sure who made this but it could possibly be made by a NSW company called Impart. I sent them an email and they said they did make them for QAS, aswell as for NSWFB, for which I have also found a vehicle with the same siren 'accent'.
Rapid response vehicles use the Hazard 'Slic' 1000 Series.
I heard once that Code 3 siren amp was used at one stage although I have not heard one.
Older ambulances use a Hazard siren that also has a dual mode on some vehicles. This siren is still used in SA and is common in VIC.
Sites
Code 3/Britax
http://www.code3pse.com
http://www.britaxae.com.au/
Nautech
http://www.nautech.com/
Hazard Systems
http://hazard.com.au
Federal Signal
http://www.fedsig.com/
Signal Vehicle
http://star1889.com/
Impart
http://www.impartsp.com.au/
Whelen
http://www.whelen.com/home.php
- Stretch
- Forum Manager
- Posts: 3528
- Joined: Thu Aug 09, 2007 8:29 pm
- Location: Gold Coast
- Contact:
-
- Registered User
- Posts: 81
- Joined: Fri Feb 26, 2010 2:38 pm
Re: Siren amps
Every truck I jump in is different depending on the age of vehicle.
bit like flashing lights, strobes, then leds depending on the age of the vehicle.
bit like flashing lights, strobes, then leds depending on the age of the vehicle.
- eggcarton
- Registered User
- Posts: 37
- Joined: Fri Oct 15, 2010 9:13 pm
Re: Siren amps
I am assuming you mean a Rural fire truckqld_fire wrote:Every truck I jump in is different depending on the age of vehicle.
bit like flashing lights, strobes, then leds depending on the age of the vehicle.
-
- Registered User
- Posts: 81
- Joined: Fri Feb 26, 2010 2:38 pm
Re: Siren amps
no not at all the old cattle truck which is western commands spare has flashers and different siren.eggcarton wrote:I am assuming you mean a Rural fire truckqld_fire wrote:Every truck I jump in is different depending on the age of vehicle.
bit like flashing lights, strobes, then leds depending on the age of the vehicle.
Older mercs and izuzus have a different batch.
Most of the mitusbishi canter yankees have different again.
Think it all comes down to who was making it, and the technology at the time.
Im assuming its the same story with the rurals.
I'll have a look next time and check out the brand.
- Rohan
- Registered User
- Posts: 359
- Joined: Tue Dec 04, 2007 9:50 am
- Location: cambooya
Re: Siren amps
Yeah for the rurals it's depending on the year the truck was brought out and and whom was manufacturing the bodies at that period of time to what gear that they have in them.qld_fire wrote:no not at all the old cattle truck which is western commands spare has flashers and different siren.
Older mercs and izuzus have a different batch.
Most of the mitusbishi canter yankees have different again.
Think it all comes down to who was making it, and the technology at the time.
Im assuming its the same story with the rurals
Rohan Greer
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
hon. sec. Cambooya RFB
scanners simoco 9020vhf, simoco 9020uhf, IC-400pro, IC-41s, ubc340crs
- eggcarton
- Registered User
- Posts: 37
- Joined: Fri Oct 15, 2010 9:13 pm
Re: Siren amps
Yeah thats what I thought