QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
- Stretch
- Forum Manager
- Posts: 3528
- Joined: Thu Aug 09, 2007 8:29 pm
- Location: Gold Coast
- Contact:
QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
114I. Yet to be online as they're still training. Fleet 1126. Pretty cool truck
Mitch Rogers
- rochedalescan
- Founder
- Posts: 1632
- Joined: Fri Jun 01, 2007 5:08 pm
- Location: Brisbane
- Contact:
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Where do you reakon that one will be stationed Mitch ?
Shane Logan
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
- Stretch
- Forum Manager
- Posts: 3528
- Joined: Thu Aug 09, 2007 8:29 pm
- Location: Gold Coast
- Contact:
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Will be stationed at Townsville. 114I will be the callsign.This was taken out the back of the station.rochedalescan wrote:Where do you reakon that one will be stationed Mitch ?
Mitch Rogers
-
- Senior Member
- Posts: 1621
- Joined: Sat Mar 22, 2008 5:17 pm
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
?? Callsign will be 114 India.Stretch wrote:Will be stationed at Townsville. 114I will be the callsign.
--
Comint
-
- Registered User
- Posts: 110
- Joined: Tue May 18, 2010 6:00 pm
- Location: Townsville
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Comint wrote:?? Callsign will be 114 India.Stretch wrote:Will be stationed at Townsville. 114I will be the callsign.
--
Comint
That's correct
UBC73XLT, IC-400 Pro
- Stretch
- Forum Manager
- Posts: 3528
- Joined: Thu Aug 09, 2007 8:29 pm
- Location: Gold Coast
- Contact:
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
In the final stages of training and testing on the day I flew out.
Mitch Rogers
- Stretch
- Forum Manager
- Posts: 3528
- Joined: Thu Aug 09, 2007 8:29 pm
- Location: Gold Coast
- Contact:
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Their assessment was to retrieve that cone hanging off the structure.
Mitch Rogers
-
- Registered User
- Posts: 110
- Joined: Tue May 18, 2010 6:00 pm
- Location: Townsville
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Turns out that was just an exercise... Still not operational as yet, was handed over by the emergency services minister last week
Article Attached
http://www.townsvillebulletin.com.au/ar ... _news.html
Article Attached
http://www.townsvillebulletin.com.au/ar ... _news.html
UBC73XLT, IC-400 Pro
-
- Registered User
- Posts: 20
- Joined: Tue Aug 02, 2011 10:13 am
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Hey Stretch,
Whats its maximum working height, I noticed FRNSW have purchased a new Bronto and are stating it has the highest working height at 44m.
Whats its maximum working height, I noticed FRNSW have purchased a new Bronto and are stating it has the highest working height at 44m.
- Stretch
- Forum Manager
- Posts: 3528
- Joined: Thu Aug 09, 2007 8:29 pm
- Location: Gold Coast
- Contact:
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Hey Sawman.Sawman wrote:Hey Stretch,
Whats its maximum working height, I noticed FRNSW have purchased a new Bronto and are stating it has the highest working height at 44m.
44 metres as well. Also note this is equipped with the Cobra Cold Cut system
Mitch Rogers
-
- Registered User
- Posts: 110
- Joined: Tue May 18, 2010 6:00 pm
- Location: Townsville
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
Tell What?? What has the tower got too do with anything??radio_$cott wrote:You could tell that by the training tower they are on.firescan wrote:Turns out that was just an exercise... Still not operational as yet, was handed over by the emergency services minister last week
Article Attached
http://www.townsvillebulletin.com.au/ar ... _news.html
UBC73XLT, IC-400 Pro
-
- Registered User
- Posts: 202
- Joined: Sat Jan 29, 2011 7:39 pm
- Location: Brisbane
Re: QFRS - Fleet 1126, Bronto Telescopic Ladder Platform
They had to get the cone off the tower to test the truck.
517J and 517K.