Welcome to the Aussie Scanners group, register today and join in the fun!!!  The main website, forum and tapatalk have all been updated...  Why not introduce yourself in the member introductions forum ? ...

GM338 software problem

Discussion on Motorola technologies, including programming, tutorials, schematics, requests for help and new releases etc
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.

GM338 software problem

Postby GME Man » Mon Apr 03, 2017 7:13 pm

Hello everyone, the software I use for my Motorola GM338 uhf will not read the radio. The version of CPS is R06.12.02 which has been working fine for months but all of a sudden it will not read my radio, even when I click read radio and check that the com port is correct. I am probably doing one simple thing wrong but if anyone has had this problem before can you please let me know.

Cheers
GME Man
User avatar
GME Man
Registered User
 
Posts: 157
Joined: Sun Sep 25, 2016 7:46 pm
Location: Queensland

Re: GM338 software problem

Postby Phantom » Tue Apr 04, 2017 2:39 pm

Cable problems? Driver problems?
User avatar
Phantom
Forum Manager
 
Posts: 1304
Joined: Thu May 15, 2008 12:28 pm
Location: SE QLD

Re: GM338 software problem

Postby GME Man » Tue Apr 04, 2017 9:23 pm

Don't think there are any cable or driver problems as I have double checked and I have also tried it on a friends pc, which worked properly because it's a genuine cable. I will keep having a muck around with it and hopefully get this issue solved.

Thanks


Sent from my iPad using Tapatalk
GME Man
User avatar
GME Man
Registered User
 
Posts: 157
Joined: Sun Sep 25, 2016 7:46 pm
Location: Queensland

Re: GM338 software problem

Postby alinco21 » Wed Apr 05, 2017 5:56 pm

So if you pull out the comm plug from the computer in the port section it also disappears from there?
you push it back in and port 5 ect.... appears.
make sure that in the com port section of the M program you have selected the right port.
you need to go direct into the program to find this.
alinco21
Senior Member
 
Posts: 698
Joined: Sat Jun 02, 2007 5:27 pm
Location: Earth around the Gold Coast Area.

Re: GM338 software problem

Postby GME Man » Fri Apr 07, 2017 8:23 am

Yes I have double checked this but like I said in the first post, I am probably just doing one simple thing wrong :)
GME Man
User avatar
GME Man
Registered User
 
Posts: 157
Joined: Sun Sep 25, 2016 7:46 pm
Location: Queensland

Re: GM338 software problem

Postby alinco21 » Mon Apr 10, 2017 8:29 am

remove the program and all trace of it in the Common files. then reinstall it, might work.
alinco21
Senior Member
 
Posts: 698
Joined: Sat Jun 02, 2007 5:27 pm
Location: Earth around the Gold Coast Area.

Re: GM338 software problem

Postby Vkfour » Mon Apr 10, 2017 6:07 pm

One thing about these sorts of things, sometimes the leads will only work if they are plugged into the USB port that was used when the driver was installed.
Vkfour
Senior Member
 
Posts: 357
Joined: Tue Oct 05, 2010 11:27 am


Return to Motorola

Who is online

Users browsing this forum: No registered users and 4 guests