Best scanner BCD325P2 vs BCD396XT

Discussion on Uniden technologies, including programming, tutorials, schematics, requests for help and new releases etc
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
Post Reply
xpusostomos
Newly Registered Users
Posts: 2
Joined: Wed May 20, 2015 10:35 am

Best scanner BCD325P2 vs BCD396XT

Post by xpusostomos »

I was all set to buy the UBCD396XT, and then I noticed that in America they just released the BCD325P2.

It seems like, as far as I can tell, unless you are in the US one should stay away from the BCD436HP, because it is centralised around updating US frequencies from radio reference.com, and updating for Aussies would be painful (not supporting freescan etc).

But I've seen reports that the new BCD325P2 works with freescan beta, it supports Phase 2 trunk (whatever that is, I'm new to scanning, but I believe this is starting to be used in Australia), and it uses USB rather than the annoying serial cable. In other words, it mostly seems like an upgrade.

Do others concur that the BCD325P2 is the best bet now rather than the UBCD396XT?
chainz
Registered User
Posts: 125
Joined: Mon Jan 06, 2014 5:38 pm

Re: Best scanner BCD325P2 vs BCD396XT

Post by chainz »

That's definitely not true what your saying about the 436. Easy to program, so updating it is not a pain at all!
Newy1234
Registered User
Posts: 160
Joined: Mon Apr 16, 2012 8:51 pm

Re: Best scanner BCD325P2 vs BCD396XT

Post by Newy1234 »

chainz wrote:That's definitely not true what your saying about the 436. Easy to program, so updating it is not a pain at all!
Which software are you using to program a 436?
chainz
Registered User
Posts: 125
Joined: Mon Jan 06, 2014 5:38 pm

Re: Best scanner BCD325P2 vs BCD396XT

Post by chainz »

I use sentinel at the moment but you can use proscan or arc536 aswell
vkcpolice

Re: Best scanner BCD325P2 vs BCD396XT

Post by vkcpolice »

i use ark on my 436 easy to program and a lot more features
melbournefan
Registered User
Posts: 118
Joined: Thu Apr 17, 2014 8:19 pm

Re: Best scanner BCD325P2 vs BCD396XT

Post by melbournefan »

The 396 that I have got is good for programmed systems as for searching freqs my 75XLT is way better.


Sent from my iPad using Tapatalk
Post Reply