Plasma TV Repair ?

If you have something to say that just doesn't fit into any of the forums above, then post it here, remember to keep it PG rated for the kids
Post Reply
User avatar
rochedalescan
Founder
Posts: 1632
Joined: Fri Jun 01, 2007 5:08 pm
Location: Brisbane
Contact:

Plasma TV Repair ?

Post by rochedalescan »

Hi guys,

Just wondering for anyone in Brisbane if you know of anyone or can recommend someone to do a repair on my plasma TV some green lines have just appeared on the screen and its not even very old. Unfortunately it was from Wow sight and sound so can't do much there.

Cheers Shane
Shane Logan
Aussiescanners Founder

Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
SteveO
Registered User
Posts: 231
Joined: Wed Feb 10, 2010 9:43 pm
Location: Lockyer Valley, Qld

Re: Plasma TV Repair ?

Post by SteveO »

Shane there should still be a manufacturers warranty. We just got the wifes GPS replaced through the manufacturer.
Steve
User avatar
Scannersplitterguy
Registered User
Posts: 557
Joined: Sun Apr 12, 2009 10:44 pm
Location: Sunshine Coast, QLD

Re: Plasma TV Repair ?

Post by Scannersplitterguy »

What brand is it, Shane?
http://www.scannerantennasplitter.com
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
User avatar
rochedalescan
Founder
Posts: 1632
Joined: Fri Jun 01, 2007 5:08 pm
Location: Brisbane
Contact:

Plasma TV Repair ?

Post by rochedalescan »

It's a LG I will get the model when I'm home. I think I would have had it for about a year problem is I may not have the receipt anymore woops
Shane Logan
Aussiescanners Founder

Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
User avatar
rochedalescan
Founder
Posts: 1632
Joined: Fri Jun 01, 2007 5:08 pm
Location: Brisbane
Contact:

Re: Plasma TV Repair ?

Post by rochedalescan »

Model Number: 50PV250-TB

It was just talking a little while to disappear I found out but now the line is in there permanently its about a 2-3cm black line sometimes goes blury sometimes different coloured lines. Someone was saying this could be a capacitor ?
Shane Logan
Aussiescanners Founder

Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
Post Reply