Moto GP339

Post by **luxbloke** » Fri Jul 29, 2011 5:48 pm

Hi everyone,

This is my first time trying to program a GP339. I have got a USB lead to suit, Prolific drivers working etc... I have tried using a few versions of software... But:

I keep getting "Unsupported Model" error message.

Can anyone help me with this? What am I doing wrong?

Cheers
Matt

Post by **Phil** » Sat Jul 30, 2011 2:44 am

Matt,

what version are you using for the GP339 as it could be programmed with the latest software. providing you have the menu enabled you should be able to find out the CPS Version that last programmed it from your radio

Post by **luxbloke** » Sat Jul 30, 2011 8:29 am

brisbanescan wrote:Matt,

what version are you using for the GP339 as it could be programmed with the latest software. providing you have the menu enabled you should be able to find out the CPS Version that last programmed it from your radio

Ah ha... That was easy... Thankyou Brisbanescan

SW = R03.13.00 CP = R7.01

Now the million dollar question... Can't seem to find a software version that new? Does anyone have it?

Post by **Phil** » Sat Jul 30, 2011 12:46 pm

Try the CPS 06.09.00 which is Motorolas most current CPS Version for that radio. i did have it somewhere however i am not sure where i put it.

Post by **luxbloke** » Sat Jul 30, 2011 6:34 pm

brisbanescan wrote:Try the CPS 06.09.00 which is Motorolas most current CPS Version for that radio. i did have it somewhere however i am not sure where i put it.

I have 06.01.00 (doesn't work, same problem), can't find 06.09.00 for download - does anyone have it?

Post by **Phil** » Sun Jul 31, 2011 3:24 am

like i said i have it however at present the computer it is on the monitor is screwed so i can not see what i am doing so i am unable to use it until i replace the monitor.

Post by **luxbloke** » Sun Jul 31, 2011 10:25 am

brisbanescan wrote:like i said i have it however at present the computer it is on the monitor is screwed so i can not see what i am doing so i am unable to use it until i replace the monitor.

No worries Brisbanescan, Thankyou. When your comp is operational again, if you are able to supply it that would be great!

Post by **FTX03** » Fri Aug 12, 2011 10:20 am

Matt, what freq range is your 339? Was it you that I had a bid war on eBay with not long ago? What you putting on it? My software verson is R03.04.00. Brisbanescan was kind to program it for me.

Post by **Phil** » Fri Aug 12, 2011 10:09 pm

you will find that this is the person you purchased it off

Post by **neilgmb** » Fri Sep 16, 2011 9:18 am

Hi Guys

So was there any luck with anyone having CPS for this radio?? I have a GP339 aswell with SW- R03.13.00 CP - R7.01

And i can't find it anywhere either, and only have versions below that.......

Any Help Appreciated......

Cheers

Neil.

Post by **mandan** » Wed Jan 25, 2012 6:11 am

Does anyone have the correct cps software for the 339? I have looked everywhere with no luck.

Thanks,

Jon

Post by **arch9898** » Mon Mar 05, 2012 11:08 pm

More then likely you have the wrong region version of the CPS for the GP
series you need the AZ (from memory) version.

Post by **Phil** » Tue Mar 06, 2012 12:44 am

Arch,

All you would need to do is edit the cps via winhex to remove the region lock. Have done it numerous times jut can't for the life of me remember the code. It is on the Internet though.

Sent from my iPhone using Tapatalk

Post by **drhhitman** » Tue Mar 20, 2012 4:00 pm

I have a copy of the latest CPS software "R03.11.15 AS" which should be able to program your Motorola GP339.
I'll try and upload it somewhere for you.

Post by **drhhitman** » Tue Apr 03, 2012 3:00 pm

Hey Guys,

Sorry it has taken me so long to get around to uploading this.

http://www.mediafire.com/?7i4dm6p3f652cw7

This is the Australia / Asia version of the CPS to program up GP339 ----> R03.11.15_AS

Post by **Firemedic1977** » Tue Feb 26, 2013 4:36 am

I looking for the gp339 software for ver r03.10.03

Post by **Firemedic1977** » Tue Feb 26, 2013 11:33 am

Got into the radio I need software ver 05.12.02 can any one help me. Was sold this radio as a HT1250 and now have no way to program it.

Post by **chanjyj** » Sun Mar 03, 2013 8:05 pm

Firemedic

You can change the CPS region codeplug by editing the registry "SerializedString" to "@%&MAHUS". You have to dig around in the registry though. The exact location is somewhere on the internet - I'm not too familiar with Windows (I use Mac with a virtual Windows XP) so I don't want to mislead you - but I have done it once a long time ago and can confirm it works.

Post by **lynt123** » Wed Apr 03, 2013 3:06 am

HKEY_LOCAL_MACHINE\SOFTWARE\Motorola\ProRadio\FSK\SerializedString

enjoy

Post by **Gulliver** » Sat Dec 14, 2013 9:15 pm

Howdy folks, anyone know where I can locate programming SW for my GP339 SW version R03.16.00 CP version R8.00. I got an older version of the SW as posted by drhhitman but it comes up with an incompatible error message - seems to be a pretty hard bit of SW to come by.... Cheers

AussieScanners.com.au

Radio Scanning Frequencies & Information in Australia

Moto GP339

Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Moto GP339

Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339

Re: Moto GP339