Looking for GME Telemetry radio dealer software (Australia NZ) for TX3600-TX3800. I have a UHF CB repeater that uses 2 x TX3600T. The TX radio OP device has failed and I want to either swap the RX/TX radios around or convert a spare TX3800 PMR radio to a telemetry version as the repeater TX radio. Both TX and RX radios are connected to a RP3800 interconnect board. I understand I actually need to "flash" new firmware into the TX3800 using a different cable (9 PIN D to 10 pin header inside radio) to make it work as a telemetry radio. Of course with my existing software I can configure the TX3800 to accept control from the TX3600 RX radio, but I'd rather just swap around the failed radio and that's why I need the Telemetry Software to reconfigure them. Cheers.
Sent from my SM-G900I using Tapatalk
GME Telemetry Radio Software
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
-
- Newly Registered Users
- Posts: 3
- Joined: Tue Nov 14, 2017 12:50 pm
- Phantom
- Forum Manager
- Posts: 1306
- Joined: Thu May 15, 2008 12:28 pm
- Location: SE QLD
Re: GME Telemetry Radio Software
Welcome to the forum. Interesting first post
- paul02
- Newly Registered Users
- Posts: 2
- Joined: Thu Nov 23, 2017 3:20 pm
Re: GME Telemetry Radio Software
[quote="MarkSR24"]Looking for GME Telemetry radio dealer software (Australia NZ) for TX3600-TX3800.
Sounds like you need CCK3600 software
Keep looking, nothing worst than asking questions and getting no replies.
If I can help will send private post
Sounds like you need CCK3600 software

Keep looking, nothing worst than asking questions and getting no replies.
If I can help will send private post

- paul02
- Newly Registered Users
- Posts: 2
- Joined: Thu Nov 23, 2017 3:20 pm
Re: GME Telemetry Radio Software
All done for you MarkSR24, latest version for TX3600T and TX3600P. That's how helping on forum's should be ; )
-
- Newly Registered Users
- Posts: 2
- Joined: Fri Feb 26, 2016 12:13 pm
Re: GME Telemetry Radio Software
Hi Paul02 do you know of any programming software for GME CM1039U series radios
Have a happy Christmas
Colin
Have a happy Christmas
Colin
-
- Registered User
- Posts: 4
- Joined: Fri Jul 12, 2013 11:19 pm
Re: GME Telemetry Radio Software
Hello all. I’m also looking for this software for the TX3800 to turn one into a UHF. Anyone able to assist? Thank you!
-
- Registered User
- Posts: 8
- Joined: Thu Jun 12, 2025 5:34 am
Resend activation email.
What if the activation email holds an unexpected secret that could unlock hidden features on the site? Could these features change the way we interact with our community and enhance our experience in radio scanning?
You do not have the required permissions to view the files attached to this post.
-
- Registered User
- Posts: 8
- Joined: Thu Jun 12, 2025 5:34 am
AussieScanners.com.au - User Control Panel - Login.
What if the future of radio scanning in Australia shifted towards complete digital encryption, making traditional scanning obsolete? How would this impact hobbyists and emergency responders who rely on accessible frequencies for vital information?
You do not have the required permissions to view the files attached to this post.
-
- Registered User
- Posts: 8
- Joined: Thu Jun 12, 2025 5:34 am
AussieScanners.com.au - User Control Panel - Login.
What if the government started monitoring scanner frequencies more closely to track citizen activities? How would this impact the community of enthusiasts who cherish radio scanning for its freedom of information and the ability to stay informed? Should we be concerned about our right to privacy in the age of increased surveillance?
You do not have the required permissions to view the files attached to this post.