Simoco SRM9000 software
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
-
- Newly Registered Users
- Posts: 3
- Joined: Fri Oct 21, 2011 11:02 pm
Simoco SRM9000 software
i have just brought a Simoco SRM9000 and want to get the software for it
- Phil
- Administrator
- Posts: 1519
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Simoco SRM9000 software
It should be on these forums if not I will post it later when I get home
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
- Phantom
- Forum Manager
- Posts: 1306
- Joined: Thu May 15, 2008 12:28 pm
- Location: SE QLD
Re: Simoco SRM9000 software
Wow - not bad for your 1st post
.... and you didn't even say PLEASE
.... and you didn't even say PLEASE
- Phil
- Administrator
- Posts: 1519
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Re: Simoco SRM9000 software
i didn't even notice that thanks for that. just a note Chrispy google is your friend.
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
-
- Registered User
- Posts: 4
- Joined: Sun Nov 06, 2011 12:56 am
- Location: Frankston
- Contact:
Re: Simoco SRM9000 software
Hi Guys,
im in same boat, i am in need of the programing software as well for the srm 9000
i have looked everywhere but keep getting referred back to the old simoco site (TMCradio.com) which no longer exists nor the software on the site.
if you guys are please able to help me out it would be much much much appreciated
Much thanks in advance
Kind regards
Jake
im in same boat, i am in need of the programing software as well for the srm 9000
i have looked everywhere but keep getting referred back to the old simoco site (TMCradio.com) which no longer exists nor the software on the site.
if you guys are please able to help me out it would be much much much appreciated
Much thanks in advance
Kind regards
Jake
Jake
Emberlight productions
Emberlight productions
- Phil
- Administrator
- Posts: 1519
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Re: Simoco SRM9000 software
Hi Jake,
welcome to the forums.
as a general request we would like all members to make an introduction before we go handing out software sorry.
welcome to the forums.
as a general request we would like all members to make an introduction before we go handing out software sorry.
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
-
- Registered User
- Posts: 4
- Joined: Sun Nov 06, 2011 12:56 am
- Location: Frankston
- Contact:
Re: Simoco SRM9000 software
I'm based In Frankston and work full time as an audio visual technician.
I'm also a volunteer member at Frankston state emergency service and am part of their road rescue crew
I was deployed to the gipsland floods earlier in the year. For 3 weeks.
I was also there for the bush fires in the staging area and part of the cleanup crew.
I'm also a volunteer member at Frankston state emergency service and am part of their road rescue crew
I was deployed to the gipsland floods earlier in the year. For 3 weeks.
I was also there for the bush fires in the staging area and part of the cleanup crew.
Jake
Emberlight productions
Emberlight productions
- Phil
- Administrator
- Posts: 1519
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Simoco SRM9000 software
Jake,
I'm curious if you intend to use your srm9000 for listening to the SES I will upload the software as soon as I remember which computer I put it on
Sent from my iPhone using Tapatalk
I'm curious if you intend to use your srm9000 for listening to the SES I will upload the software as soon as I remember which computer I put it on
Sent from my iPhone using Tapatalk
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
-
- Newly Registered Users
- Posts: 3
- Joined: Fri Oct 21, 2011 11:02 pm
Re: Simoco SRM9000 software
i have found the software for anyone who still needs it here is a link
http://www.filesonic.com/file/3897730694/simoco.zip
http://www.filesonic.com/file/3897730694/simoco.zip
-
- Newly Registered Users
- Posts: 3
- Joined: Fri Oct 21, 2011 11:02 pm
Re: Simoco SRM9000 software
i do appoligize for my rather rude ungrateful postingorangepeel wrote:Wow - not bad for your 1st post
.... and you didn't even say PLEASE
-
- Registered User
- Posts: 201
- Joined: Sun Jan 23, 2011 2:36 pm
Re: Simoco SRM9000 software
If you are looking for the latest software which allows use of 'zones' join the Simoco SRM900 forum at yahoo groups. The file is uploaded there.
- Phil
- Administrator
- Posts: 1519
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Simoco SRM9000 software
Peter,
Just a note that the radio has to have the correct firmware for the radio to except zones, you will know if you cant have zones if when you try and load to profile to the radio and it says please load fonts. If that is the case u need to take to a simoco dealer
Sent from my iPhone using Tapatalk
Just a note that the radio has to have the correct firmware for the radio to except zones, you will know if you cant have zones if when you try and load to profile to the radio and it says please load fonts. If that is the case u need to take to a simoco dealer
Sent from my iPhone using Tapatalk
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
-
- Registered User
- Posts: 4
- Joined: Sun Nov 06, 2011 12:56 am
- Location: Frankston
- Contact:
Re: Simoco SRM9000 software
Hi Phil.
I'm programing the radio only for listen. As a
Rule of thumb in our unit we say that we are turning out or on scene for jobs so that any member with
A portable can listen and know what's goin on.
Regards
I'm programing the radio only for listen. As a
Rule of thumb in our unit we say that we are turning out or on scene for jobs so that any member with
A portable can listen and know what's goin on.
Regards
Jake
Emberlight productions
Emberlight productions
-
- Registered User
- Posts: 192
- Joined: Sun Jun 07, 2009 9:13 am
- Contact:
Re: Simoco SRM9000 software
Jake
i am in rosebud , good to know some one down my end of the world is on this forum
any how
you do know that if you intend on using your SRM to listen the SES it will be next to useless , as the ses in vic now run on the SMR or MPT trunking network , this network needs specific software to allow scanner users to listen , look up trunk view , how ever if you plan on listening to the CFA this will work ,
just giving you a heads up ,,,,,,
i am in rosebud , good to know some one down my end of the world is on this forum
any how
you do know that if you intend on using your SRM to listen the SES it will be next to useless , as the ses in vic now run on the SMR or MPT trunking network , this network needs specific software to allow scanner users to listen , look up trunk view , how ever if you plan on listening to the CFA this will work ,
just giving you a heads up ,,,,,,
John Remington
VK3 XRI
South Eastern Communications
Radios-Communications- Pagers
facebook- https://www.facebook.com/pages/South-Ea ... 183?ref=hl
http://www.secomms.com.au
sales@secomms.com.au
0434720006
VK3 XRI
South Eastern Communications
Radios-Communications- Pagers
facebook- https://www.facebook.com/pages/South-Ea ... 183?ref=hl
http://www.secomms.com.au
sales@secomms.com.au
0434720006
-
- Registered User
- Posts: 192
- Joined: Sun Jun 07, 2009 9:13 am
- Contact:
Re: Simoco SRM9000 software
Just Programmed one of these today for Full RX only
had a glitch with my software , have a look at this site , very intresting
http://www.radarc.org/Simoco_radio.htm
has all you need
had a glitch with my software , have a look at this site , very intresting
http://www.radarc.org/Simoco_radio.htm
has all you need
John Remington
VK3 XRI
South Eastern Communications
Radios-Communications- Pagers
facebook- https://www.facebook.com/pages/South-Ea ... 183?ref=hl
http://www.secomms.com.au
sales@secomms.com.au
0434720006
VK3 XRI
South Eastern Communications
Radios-Communications- Pagers
facebook- https://www.facebook.com/pages/South-Ea ... 183?ref=hl
http://www.secomms.com.au
sales@secomms.com.au
0434720006
-
- Newly Registered Users
- Posts: 1
- Joined: Tue Jun 25, 2013 12:55 pm
Re: Simoco SRM9000 software
Hi guys,
I had an account on here before but i forgot my login so i tried to recover it with my email and it said it didn't recognise the email linked to any account. So i tried to make a new one with the same email and it said Email in use, which it was. Anyways, so i had to make this new account now.
I seem to have lost my Simoco SRM9000 software for some reason it is no longer on my programming laptop. It was an older version anyways since its been a while since i have used radios. Just seen the link posted above this so will try that as i have had no luck getting it anywhere else.. Good to be back here!!
thanks,
Dave.
I had an account on here before but i forgot my login so i tried to recover it with my email and it said it didn't recognise the email linked to any account. So i tried to make a new one with the same email and it said Email in use, which it was. Anyways, so i had to make this new account now.
I seem to have lost my Simoco SRM9000 software for some reason it is no longer on my programming laptop. It was an older version anyways since its been a while since i have used radios. Just seen the link posted above this so will try that as i have had no luck getting it anywhere else.. Good to be back here!!
thanks,
Dave.
-
- Newly Registered Users
- Posts: 2
- Joined: Sun Mar 10, 2013 11:52 am
Re: Simoco SRM9000 software
Both links allow you to download. thank you both very much!
-
- Newly Registered Users
- Posts: 1
- Joined: Sun Jan 12, 2014 9:58 am
Re: Simoco SRM9000 software
Hi all, Newbie here from WA. Just trying to tune up my Simoco SRM9022 and have all the software from RADARC but I dont have the drivers for the programming cable and the link above is no longer working. Would anyone be able to help please? Also I am using a USB to serial adapter as my laptop does not have a serial port. Will this be an issue?
Thanks
Thanks
-
- Newly Registered Users
- Posts: 2
- Joined: Mon Mar 31, 2014 7:56 am
Re: Simoco SRM9000 software
hi I have sent you a email with my details . thanks heaps