Gme rx1300
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
- bananaman
- Registered User
- Posts: 137
- Joined: Tue Mar 10, 2009 10:45 pm
- Location: Ipswich Motorway, Goodna
Gme rx1300
gme rx 1300
does anyone have one or played with one and are they any good?
does anyone have one or played with one and are they any good?
- Scannersplitterguy
- Registered User
- Posts: 557
- Joined: Sun Apr 12, 2009 10:44 pm
- Location: Sunshine Coast, QLD
Re: Gme rx1300
I'm wondering the same thing too.
They have a much wider freq. range than a similar model Uniden and 1300 memory locations.
Only feature lacking is SSB - essential for HF frequencies.
Anyone own one or used one?
They have a much wider freq. range than a similar model Uniden and 1300 memory locations.
Only feature lacking is SSB - essential for HF frequencies.
Anyone own one or used one?
http://www.scannerantennasplitter.com
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
- bananaman
- Registered User
- Posts: 137
- Joined: Tue Mar 10, 2009 10:45 pm
- Location: Ipswich Motorway, Goodna
Re: Gme rx1300
i went and got one and its not that great when i brought it the battery didnt charge so took it back now any time i pick something up theres a backround noise that nearly drowns out whats tring to be heard i hope someone can explain why this happens only on everything but radio stations like triple j and b105 i think it might be a trip back to the shop to get fixed again as its still under the 3 yr warranty . other than that its not to bad no gaps in the scanning range is great and being able to tune frequencys down to the last number is good
- Scannersplitterguy
- Registered User
- Posts: 557
- Joined: Sun Apr 12, 2009 10:44 pm
- Location: Sunshine Coast, QLD
Re: Gme rx1300
Not a good start with two problems....
How good is the battery life now?
How good is the battery life now?
http://www.scannerantennasplitter.com
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
- bananaman
- Registered User
- Posts: 137
- Joined: Tue Mar 10, 2009 10:45 pm
- Location: Ipswich Motorway, Goodna
Re: Gme rx1300
it gets a good 12hrs out of the battery but then takes nearly 15hrs to charge the stupid thing
- rochedalescan
- Founder
- Posts: 1632
- Joined: Fri Jun 01, 2007 5:08 pm
- Location: Brisbane
- Contact:
Re: Gme rx1300
Should just take it back, maybe pay a little extra and get something like an icom
Shane Logan
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
- bananaman
- Registered User
- Posts: 137
- Joined: Tue Mar 10, 2009 10:45 pm
- Location: Ipswich Motorway, Goodna
Re: Gme rx1300
I wouldnt mind but do they have gaps in the scanning like uniden?
- rochedalescan
- Founder
- Posts: 1632
- Joined: Fri Jun 01, 2007 5:08 pm
- Location: Brisbane
- Contact:
Re: Gme rx1300
Looking on here http://www.icom-australia.com/products/ ... ic-r5.html it says that it has full frequency coverage (Full frequency coverage (0.150 MHz to 1309.995MHz)) Which I would think is no gaps
Shane Logan
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
Aussiescanners Founder
Australia's Premier Communications forum!
~ Please contact Phil for administration enquiries ~
- Scannersplitterguy
- Registered User
- Posts: 557
- Joined: Sun Apr 12, 2009 10:44 pm
- Location: Sunshine Coast, QLD
Re: Gme rx1300
Think I'll give it a miss, nothing worse than flat batteries and considering it doesn't use AA size, it's not really practical.bananaman wrote:it gets a good 12hrs out of the battery but then takes nearly 15hrs to charge the stupid thing
I hope GME is listening.....give it SSB and AA batteries and I'll snap one up.
http://www.scannerantennasplitter.com
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
http://www.acdcmanuals.com
AOR AR8200MK3, Icom IC-R75, UBC370CRS, UH7750NB, SR162 VHF AIS, SDR USB Dongle, Anytone AT-6666, Pearce Simpson Super Cheetah 27 MHz AM/SSB, QJE QJ-PS30II 30A PSU, Diamond DJ-130 Discone, Shockwave 5/8 27MHz, DIY HF longwire
- bananaman
- Registered User
- Posts: 137
- Joined: Tue Mar 10, 2009 10:45 pm
- Location: Ipswich Motorway, Goodna
Re: Gme rx1300
amen to that
-
- Registered User
- Posts: 102
- Joined: Sun Mar 23, 2008 6:59 am
Re: Gme rx1300
sounds like a heap of crap to me ,much much better scanners out there one would think and knows