EASTLINK DMR

Communications scanning & radio related discussion for Victoria, covering Melbourne, the Grampians, Gippsland, Loddon Mallee etc
Post Reply
mbui0309
Registered User
Posts: 5
Joined: Mon May 23, 2016 1:26 am

EASTLINK DMR

Post by mbui0309 »

Howdy guys.

Heres some info for you guys if interested.

I've got Eastlink DMR updated.
I've also got all channels (30 of them) of the Melbourne (CSE CROSSCOM) Connect Plus Network for 101 or 120 Collins st
I've got other various bits and pieces people may request.

I'm also looking at other info, such as the frequency Metro Train (prefer flinders street) station staff use.

Thats basically all I'm looking for. I know someone requested the Latrobe Valley Bus Lines Frequency. Be happy to know its analogue (both frequencies technically). in regards to that as well, they have the tech to change it to DMR but from what I can understand is, they're too useless to do it.
Last edited by mbui0309 on Fri Jun 19, 2020 9:15 pm, edited 2 times in total.
User avatar
Pumper_50
Registered User
Posts: 293
Joined: Tue Nov 15, 2011 10:11 am

Re: EASTLINK DMR

Post by Pumper_50 »

There were a few changes to frequencies recently but I'd hardly say 'all wrong'. One or two frequencies swapped locations, an additional site was added or similar but using an already existing allocation, etc

Have the following for Eastlink.

500.1125 Tolling Point 1, Donvale
500.1375 Tolling Point 9, Dandenong North
500.2875 Eastlink Operations Center, Ringwood
500.4000 Eastlink Maintenance Center, Ringwood
500.3000 Tolling Point 11, Keysborough
500.4000 Tolling Point 13, Carrum Downs
500.4125 Tolling Point 5, Wantirna South
500.7125 Tolling Point 7, Scoresby

Given I've posted this and shared on the forums what I think may be correct for Eastlink perhaps you'll share yours and you can fill in what is missing or offer the corrections you have to the above.

Understand your frustrations on 'sharing'. Shared plenty over years, even had information basically copied and pasted from sites I've been involved in and claimed as their own work. (Deliberate errors usually helps to identify).
I've even had my own scanner files sent to me by people claiming to had compiled and researched 'all by themselves'.

Latrobe Valley Bus Lines were on 465.975MHz and 465.750MHz,obviously things change and this may not still be the case.

Haven't really had much time at all for Vicradio Zone of late, a wife, two kids and a job will do that to you, I'll find time...one day. :?
mbui0309
Registered User
Posts: 5
Joined: Mon May 23, 2016 1:26 am

Re: EASTLINK DMR

Post by mbui0309 »

Pumper 50. Are you the person that manages it. I might shoot you an email with some information for Melbourne
User avatar
Pumper_50
Registered User
Posts: 293
Joined: Tue Nov 15, 2011 10:11 am

Re: EASTLINK DMR

Post by Pumper_50 »

Yes, my site.

Sent from my SM-G920I using Tapatalk
User avatar
Pumper_50
Registered User
Posts: 293
Joined: Tue Nov 15, 2011 10:11 am

Re: EASTLINK DMR

Post by Pumper_50 »

I'm also looking at other info, such as the frequency Metro Train (prefer flinders street) station staff use
See how you go these, all are listed under Victorian Rail Track.

Flinders Street Station
411.3375 @5w (Simplex) (Platforms)
411.5250 @5w( Simplex) (Platforms)
411.6625 @5w (Simplex) (Platforms)
411.9250 @5w (Simplex) (Platforms)
491.3625 @5w (Platforms)
505.6375 @5w (Platforms)

Flagstaff Station
492.9625 @ 5w (Upper)

Parliament Station
473.5750 @ 50w (See also Melbourne Central Station)
506.9625 @ 5w (Upper)

Melbourne Central Station
473.5750 @ 5w (See also Parliament Station)

Also of note are the listings for a 'Southern Cross Station Pty Ltd'.
505.1500 @ 50w
505.7375 @ 50w
506.2625 @ 50w
506.8000 @ 50w

You may find this is more related to the operation of the entire complex in regards to their commercial and retail sections and not actual rail related matters, I am not certain though.
mbui0309
Registered User
Posts: 5
Joined: Mon May 23, 2016 1:26 am

Re: EASTLINK DMR

Post by mbui0309 »

I'll check them out on my next day off. Start back at work tomorrow.

I've checked some of those already sitting at flinders street station. You'll find the 411.xxx are more for rail maintenance staff.

But I'll check out the 500.xxx frequencies to see if there is anything active.
User avatar
Pumper_50
Registered User
Posts: 293
Joined: Tue Nov 15, 2011 10:11 am

Re: EASTLINK DMR

Post by Pumper_50 »

Goodo. Let me know how you go.

Sent from my SM-G920I using Tapatalk
melbournefan
Registered User
Posts: 118
Joined: Thu Apr 17, 2014 8:19 pm

Re: EASTLINK DMR

Post by melbournefan »

The SCS 5xx ones are mainly used for Security.

I'l see if I can post more on my forum.
Post Reply