NEW ALINCO HH

Discussion on Alinco technologies, including programming, tutorials, schematics, requests for help and new releases etc
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
Post Reply
User avatar
AIRMAN
Registered User
Posts: 627
Joined: Wed Aug 06, 2008 3:49 pm

NEW ALINCO HH

Post by AIRMAN » Mon May 10, 2010 3:55 pm

The new Alinco DJ-X11E is about to hit our shores. The only claimed supplier is Andrews Comms.

Anyone got any info on this???

alinco21
Senior Member
Posts: 698
Joined: Sat Jun 02, 2007 5:27 pm
Location: Earth around the Gold Coast Area.

Re: NEW ALINCO HH

Post by alinco21 » Mon May 10, 2010 5:23 pm

there must be some one else perhaps ATRC? THey do Alinco gear.

User avatar
bodyguard
Registered User
Posts: 1210
Joined: Fri Aug 31, 2007 7:54 pm
Location: Brisbane, QLD

Re: NEW ALINCO HH

Post by bodyguard » Mon May 10, 2010 5:31 pm

Prestige comms also do Alinco scanners
Cheers
BG


UBC9000XLT, UBCT8, BCT15X, UBC92XLT, Kenwood R-5000, PSR-410 , KG-UVD1P

User avatar
AIRMAN
Registered User
Posts: 627
Joined: Wed Aug 06, 2008 3:49 pm

Re: NEW ALINCO HH

Post by AIRMAN » Tue May 11, 2010 1:28 pm

Lee Andrews claims he is the only 'authorized' Alinco dealer. He is the only one touting this new model at around AU$499 when it arrives here.

Just looked at his site (link below) and he is claiming its now available...

http://www.andrewscom.com.au/site-section-07.htm

I like the SSB feature.

Here's another link I've just located with a bit more info on it...

http://universal-radio.com/catalog/widerxvr/4011.html
Last edited by AIRMAN on Tue May 11, 2010 1:38 pm, edited 1 time in total.

alinco21
Senior Member
Posts: 698
Joined: Sat Jun 02, 2007 5:27 pm
Location: Earth around the Gold Coast Area.

Re: NEW ALINCO HH

Post by alinco21 » Tue May 11, 2010 1:35 pm

http://www.atrc.com.au/
have them for $489 = postage. (they are a alinco dealer) have bought my DJX-10E and then DJX-2000E from them.
Good service.

I would buy from ATRC - personally.

Paul.

User avatar
AIRMAN
Registered User
Posts: 627
Joined: Wed Aug 06, 2008 3:49 pm

Re: NEW ALINCO HH

Post by AIRMAN » Tue May 11, 2010 2:02 pm

alinco21 wrote:http://www.atrc.com.au/
have them for $489 = postage. (they are a alinco dealer) have bought my DJX-10E and then DJX-2000E from them.
Good service.

I would buy from ATRC - personally.

Paul.
Wow that is great to know...thanks Paul.

Lot more detail about this new model there as well. I wonder if the earphone socket on it is stereo?

Icom are still in the dark ages with this. I have an RX7 which has a mono socket therefore requiring an adapter which sticks out a mile. :(

alinco21
Senior Member
Posts: 698
Joined: Sat Jun 02, 2007 5:27 pm
Location: Earth around the Gold Coast Area.

Re: NEW ALINCO HH

Post by alinco21 » Tue May 11, 2010 2:36 pm

will look further at that model to see it is any better than the DJX-2000E one I have.

Comint
Senior Member
Posts: 1607
Joined: Sat Mar 22, 2008 5:17 pm

Re: NEW ALINCO HH

Post by Comint » Tue May 11, 2010 5:45 pm

AIRMAN wrote:Lot more detail about this new model there as well. I wonder if the earphone socket on it is stereo?
Why don't you contact one of the Dealers, and ask them.

If you Google the EME-6 earphone, you will find images which show a Mono Plug.

Googling the EME-26 shows a Stereo Plug, but only a single earpiece.
Icom are still in the dark ages with this.
As has been pointed out before, the Icoms do in fact have a Stereo audio socket, however the Ring connection is used for the CI-V Computer Interface.

Also, I doubt if there are too many other scanners on the market, with provision for Stereo earphones.

--
Comint

User avatar
jaskel
Registered User
Posts: 330
Joined: Sun Nov 29, 2009 7:13 am
Location: Sydney, NSW
Contact:

Re: NEW ALINCO HH

Post by jaskel » Wed May 12, 2010 9:24 pm

looks pretty decent....would have thought they would release P25 capacity?
Uniden UBCD996XT, UBCD396T,Pro 96, UBC120XLT, Icom IC-208H, GME TX4220, Icom IC-F410, Discone

User avatar
AIRMAN
Registered User
Posts: 627
Joined: Wed Aug 06, 2008 3:49 pm

Re: NEW ALINCO HH

Post by AIRMAN » Wed Aug 18, 2010 2:54 pm

I have done my research and I have so far found that the Alinco DJ X3 is the ONLY HH scanner with a stereo socket and receives FM Stereo.

I am sick of mono socket scanners. They need a mono/stereo plug which sticks out and becomes loose after a while and eventually you get snap crackle and pop.

The DJX3 has been out a few years, but it has moderately to good reviews.

User avatar
Phantom
Forum Manager
Posts: 1305
Joined: Thu May 15, 2008 12:28 pm
Location: SE QLD

NEW ALINCO HH

Post by Phantom » Wed Aug 18, 2010 4:36 pm

Personally - -ATRC is the place for me. Good service and good advice.

Pricing is good for regular customers

Just my personal experience


Sent from my iPhone using Tapatalk

railscan
Registered User
Posts: 213
Joined: Fri Apr 10, 2009 4:23 pm

Re: NEW ALINCO HH

Post by railscan » Sat Aug 05, 2017 9:12 am

Dean Jones wrote:will take a gander at that model to see it is any superior to the DEX-2000S one I have.
I don't know if you have noticed, but this thread is 7 years old?

R

Post Reply