Hi, a small introduction.
I'm Michael. Live on the Atherton Tabelands.
I own a BCD325P2
Zastone A19 Transeiver
I'm relatively new to 2 ways but know about scanners.
I'm having some tech issues with my Zastone A19 Transeiver as I'm having a little problem understanding Some technical references. If anyone here is familiar with 2 ways and codes relating to them I would very much appreciate the assistance.
Unfortunaelty I am unsure how I can post screen captures here of what I need assistance with.
Regards
Michael
New FNQ
-
jwind31
- Registered User
- Posts: 9
- Joined: Tue Sep 20, 2016 11:27 pm
- Location: Brisbane/Cairns/Tablelands
- Contact:
Re: New FNQ
Hi Michael,
Im in mareeba and have some experience in 2 way and coding?
What are you trying to achieve
Jakob
Im in mareeba and have some experience in 2 way and coding?
What are you trying to achieve
Jakob
-
Mickii001
- Registered User
- Posts: 5
- Joined: Thu Jan 04, 2018 10:32 am
Re: New FNQ
Thanks for your reply.
I seemed to have worked out what I need.
But what you can assist me with is the frequencies for Both Brunos Taxis and Mareeba Taxis.
You wouldnt happen to have those would you
interested in how busy those 2 companies are comapared to atherton
Regards
Michael
I seemed to have worked out what I need.
But what you can assist me with is the frequencies for Both Brunos Taxis and Mareeba Taxis.
You wouldnt happen to have those would you
interested in how busy those 2 companies are comapared to atherton
Regards
Michael
Last edited by Mickii001 on Mon Jan 08, 2018 7:34 am, edited 1 time in total.
-
Vkfour
- Senior Member
- Posts: 376
- Joined: Tue Oct 05, 2010 11:27 am
Re: New FNQ
Why do you need the transmit frequencies?
-
Phantom
- Forum Manager
- Posts: 1306
- Joined: Thu May 15, 2008 12:28 pm
- Location: SE QLD
Re: New FNQ
You will just need the receive frequencies.
-
Mickii001
- Registered User
- Posts: 5
- Joined: Thu Jan 04, 2018 10:32 am
Re: New FNQ
Fair enough just the receive frequencies, the offset is usually around 4600 so if anyone has the receive frequencies that would be good.
Thanks
Thanks
-
Mickii001
- Registered User
- Posts: 5
- Joined: Thu Jan 04, 2018 10:32 am
Re: New FNQ
VKFour,
I thought it was common practice to get all.
After reading most of the boards here, I notice that both TX/RX Frequencies are supplied.
So excuse me if I was wrong to ask, I thought it was common practice here to supply both.
My Mistake.
It doesn't matter tho, I'll be in the area later this week, and will get the frequencies myself.
So, I ask the same question that was asked of me but a different spin.
Why do ppl have Scanners? (To be Nosey of course) LOL
well my request was pure innocent, I only asked because I was being Nosey myself and curious how busy other ppl are. there wasn't a hidden agenda, just someone being nosey LOL
Take Care
Mick
I thought it was common practice to get all.
After reading most of the boards here, I notice that both TX/RX Frequencies are supplied.
So excuse me if I was wrong to ask, I thought it was common practice here to supply both.
My Mistake.
It doesn't matter tho, I'll be in the area later this week, and will get the frequencies myself.
So, I ask the same question that was asked of me but a different spin.
Why do ppl have Scanners? (To be Nosey of course) LOL
well my request was pure innocent, I only asked because I was being Nosey myself and curious how busy other ppl are. there wasn't a hidden agenda, just someone being nosey LOL
Take Care
Mick
-
vk4go
- Newly Registered Users
- Posts: 1
- Joined: Thu May 15, 2014 7:41 am
- Location: Atherton (FNQ)
- Contact:
-
Mickii001
- Registered User
- Posts: 5
- Joined: Thu Jan 04, 2018 10:32 am
Re: New FNQ
I bet you hear a lot of funny stuff at times, I work for them and I suppose you hear me at times haha