Welcome to the Aussie Scanners group, register today and join in the fun!!!  The main website, forum and tapatalk have all been updated...  Why not introduce yourself in the member introductions forum ? ...

New FNQ

A place for all new members to the forum to introduce themselves, tell us a little about you, your radio experiences, and anything else relevant

New FNQ

Postby Mickii001 » Fri Jan 05, 2018 8:42 am

Hi, a small introduction.
I'm Michael. Live on the Atherton Tabelands.
I own a BCD325P2
Zastone A19 Transeiver

I'm relatively new to 2 ways but know about scanners.

I'm having some tech issues with my Zastone A19 Transeiver as I'm having a little problem understanding Some technical references. If anyone here is familiar with 2 ways and codes relating to them I would very much appreciate the assistance.

Unfortunaelty I am unsure how I can post screen captures here of what I need assistance with.

Regards

Michael
Mickii001
Registered User
 
Posts: 5
Joined: Thu Jan 04, 2018 10:32 am

Re: New FNQ

Postby jwind31 » Sat Jan 06, 2018 10:33 pm

Hi Michael,

Im in mareeba and have some experience in 2 way and coding?

What are you trying to achieve

Jakob
jwind31
Registered User
 
Posts: 4
Joined: Tue Sep 20, 2016 11:27 pm
Location: Australia

Re: New FNQ

Postby Mickii001 » Sun Jan 07, 2018 4:52 am

Thanks for your reply.
I seemed to have worked out what I need.
But what you can assist me with is the frequencies for Both Brunos Taxis and Mareeba Taxis.

You wouldnt happen to have those would you :)
interested in how busy those 2 companies are comapared to atherton :)

Regards

Michael
Last edited by Mickii001 on Mon Jan 08, 2018 7:34 am, edited 1 time in total.
Mickii001
Registered User
 
Posts: 5
Joined: Thu Jan 04, 2018 10:32 am

Re: New FNQ

Postby Vkfour » Sun Jan 07, 2018 6:55 am

Why do you need the transmit frequencies?
Vkfour
Senior Member
 
Posts: 355
Joined: Tue Oct 05, 2010 11:27 am

Re: New FNQ

Postby Phantom » Mon Jan 08, 2018 7:01 am

You will just need the receive frequencies.
User avatar
Phantom
Forum Manager
 
Posts: 1304
Joined: Thu May 15, 2008 12:28 pm
Location: SE QLD

Re: New FNQ

Postby Mickii001 » Mon Jan 08, 2018 7:26 am

Fair enough just the receive frequencies, the offset is usually around 4600 so if anyone has the receive frequencies that would be good.

Thanks :)
Mickii001
Registered User
 
Posts: 5
Joined: Thu Jan 04, 2018 10:32 am

Re: New FNQ

Postby Mickii001 » Tue Jan 09, 2018 12:38 am

VKFour,
I thought it was common practice to get all.
After reading most of the boards here, I notice that both TX/RX Frequencies are supplied.
So excuse me if I was wrong to ask, I thought it was common practice here to supply both.

My Mistake.

It doesn't matter tho, I'll be in the area later this week, and will get the frequencies myself.

So, I ask the same question that was asked of me but a different spin.

Why do ppl have Scanners? (To be Nosey of course) LOL

well my request was pure innocent, I only asked because I was being Nosey myself and curious how busy other ppl are. there wasn't a hidden agenda, just someone being nosey LOL :)

Take Care

Mick
Mickii001
Registered User
 
Posts: 5
Joined: Thu Jan 04, 2018 10:32 am

Re: New FNQ

Postby vk4go » Wed Jan 17, 2018 8:16 pm

I am also in Atherton
The local Taxi here is RX 162.925

73 Art VK4GO
http://vk4go.net
vk4go
Newly Registered Users
 
Posts: 1
Joined: Thu May 15, 2014 7:41 am
Location: Atherton (FNQ)

Re: New FNQ

Postby Mickii001 » Wed Feb 07, 2018 4:11 am

vk4go wrote:I am also in Atherton
The local Taxi here is RX 162.925

73 Art VK4GO
http://vk4go.net



I bet you hear a lot of funny stuff at times, I work for them and I suppose you hear me at times haha
Mickii001
Registered User
 
Posts: 5
Joined: Thu Jan 04, 2018 10:32 am


Return to Member Introductions

Who is online

Users browsing this forum: No registered users and 13 guests