I am having problems with my PDW and SDR#. When a pocsag 512 signal comes through, the needle in PDW goes all the way to the right, then when the sound in the signal changes to the lower crackly sound it instantly goes all the way to the right. The signal is crystal clear coming through. I am just using a SDR dongle.
Any help appreciated
Cheers
Frothy
Issues with PDW and SDR#
-
- Registered User
- Posts: 38
- Joined: Mon Aug 29, 2016 4:20 pm
Issues with PDW and SDR#
APX2500, XTL5000, XTS2500 UBCD436PT, UBC73XLT, SRM9000 (9022) +DMAP, Codan 9323 + 9350, Motorola MCS2000 UHF+VHF, TP9100, TM9100, TM8200, DM3400, IC-718, FT 70-D
-
- Registered User
- Posts: 116
- Joined: Fri Jan 30, 2015 6:58 am
Re: Issues with PDW and SDR#
Hi there Ben,
Please ensure your audio settings are correct and that you are using the right sample rate. This information can be found on the RTL-SDR quick start guide for PDW. Check over this tutorial to ensure all of your settings are correct and that you haven't made any small mistakes. I have done this before and all it took was a quick re-read of the tutorial.
Hope all goes well
Please ensure your audio settings are correct and that you are using the right sample rate. This information can be found on the RTL-SDR quick start guide for PDW. Check over this tutorial to ensure all of your settings are correct and that you haven't made any small mistakes. I have done this before and all it took was a quick re-read of the tutorial.
Hope all goes well
Mitch Baker - VK3GLV
Uniden UBCD396XT, BCT15X, UBCD996T, UBCD436-PT, Tait TM9100, Simoco SRM9000 (VHF + UHF DMAP), Icom IC-2730a, Codan 9323 (Codan 9030 Autotune Antenna), Retevis RT52
Uniden UBCD396XT, BCT15X, UBCD996T, UBCD436-PT, Tait TM9100, Simoco SRM9000 (VHF + UHF DMAP), Icom IC-2730a, Codan 9323 (Codan 9030 Autotune Antenna), Retevis RT52