Issues with PDW and SDR#

If your into decoding transmissions, this is the place for you. Topics cover everything from pocsag, ermes, acars, flex & mobitex!!!
Post Reply
rothackerben8
Registered User
Posts: 36
Joined: Mon Aug 29, 2016 4:20 pm

Issues with PDW and SDR#

Post by rothackerben8 » Tue Aug 30, 2016 12:19 pm

I am having problems with my PDW and SDR#. When a pocsag 512 signal comes through, the needle in PDW goes all the way to the right, then when the sound in the signal changes to the lower crackly sound it instantly goes all the way to the right. The signal is crystal clear coming through. I am just using a SDR dongle.

Any help appreciated
Cheers
Frothy
UBCD436PT, UBC73XLT, IC-2730, IC-720A, IC-718, FT70D, GM950+

Boort8720
Registered User
Posts: 98
Joined: Fri Jan 30, 2015 6:58 am

Re: Issues with PDW and SDR#

Post by Boort8720 » Sat Dec 31, 2016 11:51 am

Hi there Ben,

Please ensure your audio settings are correct and that you are using the right sample rate. This information can be found on the RTL-SDR quick start guide for PDW. Check over this tutorial to ensure all of your settings are correct and that you haven't made any small mistakes. I have done this before and all it took was a quick re-read of the tutorial.

Hope all goes well
Mitch Baker

Uniden UBCD396XT, BCT15X, UBCD996T, UBCD436-PT, Tait TM9100, Simoco SRM9000, Yaesu FT70DR, Motorola GP339

Post Reply