Urgent Advise needed on purchasing

[FuhrerSheep]

Hey Guys,

Newbie again. I'm getting my Radio tomorrow and i needed some advise on purchasing my first radio.
I have a ford falcon 2004 BA which means I don't have room to mount a full DIM1 unit. I've been advised that maybe the GME TX3440 would be suitable because I can hide the transceiver under the dash/seat. All i need to know is can this radio allow me to do basic TX and RX of QPS and QAS on the Gold Coast. Also does this gear come with any programming software or do you need to program all via the handset?


If it doesn't do what i need can you guys recommend a device that would?

Thanks guys!

[Stretch]

How much you paying for it??? http://www.aussiescanners.com/viewtopic ... 211&t=1558 Try that

[FuhrerSheep]

Not sure yet mate is helping me buy one. so from what i can read it lets me do anything from 400 - 520 which means the QPS band is included?

Thanks Stretch

[Stretch]

Yeah mate, all the UHF band of the QPS, QAS, QFRS.

[FuhrerSheep]

Much love Strech,

Since your on the GC what channels you usually hang out on?
any good ones to listen out for?

[Stretch]

When I've got the cb going its normally 3 (Lower Beechmont) or if im out and about i sometimes sit on 8 (Springbrook)

As for QAS etc freqs, where you located?

[Kevaclone]

Hey Guys,

Newbie again. I'm getting my Radio tomorrow and i needed some advise on purchasing my first radio.
I have a ford falcon 2004 BA which means I don't have room to mount a full DIM1 unit. I've been advised that maybe the GME TX3440 would be suitable because I can hide the transceiver under the dash/seat. All i need to know is can this radio allow me to do basic TX and RX of QPS and QAS on the Gold Coast. Also does this gear come with any programming software or do you need to program all via the handset?


If it doesn't do what i need can you guys recommend a device that would?

Thanks guys!

Buy one of these
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT



Gives you a full DIN mount in your Falcon

This one is much better though

http://cgi.ebay.com.au/Ford-Falcon-BA-B ... 4cf07aa91a




pic stolen from another web page but it look soo bloody good

[FuhrerSheep]

Hey Kevaclone

Thanks man! saw them before unfortunitly i already have a headdeck installed so no room at all.

I'm in Robina but im wanting to get either Surfers or Palm beach if possible.
Do we have a FREQ Chart laying around for QPS, QAS on The GC?

[Stretch]

Im about to head out to work, but when I come home i'll compile a list for you and send it to you

[FuhrerSheep]

Thank you Kind sir!

[FuhrerSheep]

Hey Buddy any chance on that list?

Many thanks,

James

[Stretch]

Hey Buddy any chance on that list?

Many thanks,

James

Can you send me an email, I'm sorry I lost you're address.

mrphoto@tpg.com.au

[jaskel]

Hey man, have a look at the Icom IC208H, I got one in my Territory company car, its got the same dash as ur car and fits nicely!

I used to have it mounted under the fuse area but moved it in better view in front of the hand brake

IMG_0802.JPG

IMG_0801.JPG

IMG_0799.JPG

the old install

ic208 061.jpg

ic208 062.jpg

[Nissassin]

Yeah mate, all the UHF band of the QPS, QAS, QFRS.

where can i get QAS frequency? please help! all i could find are the ones that start eg. 412 my radio does not got that low i have ic-41s

cheers,
Nissassin

[Phil]

All QAS in the SE Region use 412 - 417 MHz I'm afraid


Sent from my iPhone using Tapatalk