Tait 2020-513-I00
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
-
- Registered User
- Posts: 13
- Joined: Wed May 18, 2011 5:51 pm
Tait 2020-513-I00
Hi All, Just recently brought a Tait 2020 On ebay with uhf cb channels in it. just wondering if anyone out there knows about these as i have tried all the software on this site and still no luck. its messages as its trying to read the radio as follows; Software Version: STD-0557, Database Version: 0209, Dynamic Database Partition: OCA7. Anyone out there got any idea's or could send me the software please.
Last edited by john16689 on Fri Oct 22, 2021 7:43 pm, edited 2 times in total.
- Phil
- Administrator
- Posts: 1517
- Joined: Sun Jun 03, 2007 8:51 pm
- Location: Southside of Brisbane, Qld
Tait 2020-513-I00
John,
It depends if it is a series 1 or series 2 I it is series 2 then it is one piece of software for all the radios if it is series 1 then one software for each radio
Sent from my iPhone using Tapatalk
It depends if it is a series 1 or series 2 I it is series 2 then it is one piece of software for all the radios if it is series 1 then one software for each radio
Sent from my iPhone using Tapatalk
Phil
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
Forum Administrator
phil@aussiescanners.com.au
Uniden UBCD996T, RH96, UBCD396xt, Uniden UBCD563-PT
RTL-SDRs way to many
Motorola GP328, GP338, GP328 Plus, XTS3000, DP3400 VHF, DP2600e, DP4801e, DM4601e, XTL5000-03, XTS2500 M3
Simoco SRM9030 AC, SRM9022 UW
Hytera - PD412, PD462, PD682, MD782G, PD782G
Barrett 950
Icom IC-F60, IC-410 Pro
Tait TM8250
Kenwood - NX720HG
-
- Registered User
- Posts: 13
- Joined: Wed May 18, 2011 5:51 pm
Re: Tait 2020-513-I00
Hi Phil thanks for the reply it comes up as i turn the radio on with the mic button in it comes up with this message as Follows: V 1.02 Phil cheers John
-
- Registered User
- Posts: 13
- Joined: Wed May 18, 2011 5:51 pm
Re: Tait 2020-513-I00
Any idea's????
-
- Registered User
- Posts: 9
- Joined: Tue Jun 19, 2012 10:54 pm
Re: Tait 2020-513-I00
The V1.02 would be the firmware on radio its self
-
- Registered User
- Posts: 13
- Joined: Wed May 18, 2011 5:51 pm
Re: Tait 2020-513-I00
So i need to get hold of the software version 5.57??
-
- Registered User
- Posts: 13
- Joined: Wed May 18, 2011 5:51 pm
Re: Tait 2020-513-I00
it is a series 1 orange display anyone out there got version 1.02????