Icom IC-R6

Discussion on Icom technologies, including programming, tutorials, schematics, requests for help and new releases etc
Forum rules
***NOTE*** This forum and its content are not endorsed in any way by the vendor and users are advised to exercise caution when viewing and/or acting on any information contained within. We accept no responsibility for your devices and strongly warn you to check your warranty conditions and seek expert advice before proceeding.
Post Reply
User avatar
AIRMAN
Registered User
Posts: 627
Joined: Wed Aug 06, 2008 3:49 pm

Re: Icom IC-R6

Post by AIRMAN » Mon Aug 15, 2011 11:29 am

See my review of June 14 here.

I still have this model and I am very pleased with it. I bought a Diamond SRH 771 40cm whip and this improves reception on the lower bands.

Image

Like all Icom scanning receivers programming requires step by step consultation with the manual.

I have an iMac which does not permit operating scanner software so I can't comment on that part.

Most of my listening is on vhf.

User avatar
AIRMAN
Registered User
Posts: 627
Joined: Wed Aug 06, 2008 3:49 pm

Re: Icom IC-R6

Post by AIRMAN » Tue Aug 16, 2011 11:03 pm

That's cool.

If you get stuck, PM me and I'll give you some basics about programming it, but don't ask me about CTSS as I never use it.
.

IntheGreen
Newly Registered Users
Posts: 1
Joined: Tue Dec 04, 2012 1:19 pm

Re: Icom IC-R6

Post by IntheGreen » Tue Dec 04, 2012 1:33 pm

Airman,
How'd the Diamond SRH 771 40cm whip work out on the VHF airband freq's ?
Getting my hands on an R6 in a couple of days...

Johno0885
Newly Registered Users
Posts: 2
Joined: Fri Oct 17, 2014 2:04 pm
Location: Gawler South Australia

Re: Icom IC-R6

Post by Johno0885 » Thu Oct 23, 2014 9:45 pm

Just new here and have a R6 , I tried to scan some of the bands but all I got was the Adelaide Airport Tower and the
local FM radio Stations ? Do I need to program the frequencies in before and what step sizes do I use ? Are the step
sizes automatic or do I need to program them in. I know I need to read the Manual ? Any help would be welcome.
regards johno0885 23/10/14

Post Reply