Vertex Radio question

Communications scanning & radio related discussion for Australia, covering all states and territories - discussion that is on a national level only
Post Reply
Registered User
Posts: 87
Joined: Sat Jun 29, 2013 11:56 pm
Location: Melbourne

Vertex Radio question

Post by turbine_prop » Thu Sep 04, 2014 8:34 am

Hi all.

Has anyone got any experience with the Vertex 4600 mobile and the Vertex 426 Hand Held's we are about to buy some new gear and are tossing up between Icom and Vertex.

Thanks in Advance.


User avatar
Registered User
Posts: 157
Joined: Sun Sep 25, 2016 7:46 pm
Location: Queensland

Re: Vertex Radio question

Post by GME Man » Tue Nov 01, 2016 5:56 pm

Vertex radios have worked really well for me, although I have never owned an Icom so I can really tell you which is best.

Sent from my iPad using Tapatalk

Registered User
Posts: 69
Joined: Mon Aug 05, 2013 10:10 am
Location: Birkdale

Re: Vertex Radio question

Post by Yipyip46 » Wed Nov 02, 2016 9:09 am

Good Morning, Both are good radios.I personally have a question mark hanging over the Icom Ic-41PRO as I have seen several with a faulty internal speakers. Icom may have rectified this issue by now. If you are having the radio programmed outside of the normal CB make sure you get someone who knows the programming backwards as there are a few ways of programming the various functions and the ease of operation can be effected. Both brands should give good service and the radios are type approved for use in Australia. Regards

Post Reply